Motorola iDEN i50sx Owner's Manual page 10

Figure 5. External Speaker Installation Location
Carry out the following procedure (refer to figure 5):
1. Using the trunnion bracket as a template, drill the necessary mount-
ing holes and secure the bracket with the provided self-tapping
screws.
2. Position the speaker on the trunnion bracket and secure it using the
provided wing screws.
3. Route the speaker cable to avoid physical damage or visual obstruc-
tion. Allow sufficient slack in the connector end of the cable to reach
the Junction Box (see Figure 2, Junction Box Installation).
4. Plug the speaker cable into the junction box (see Figure 2, Junction
Box Installation).
10
Mounting
Bracket
Dashboard
CAR KIT OWNER'S MANUAL
Firewall