Motorola iDEN i730 User Manual
  1. Manuals
  2. Brands
  3. Motorola Manuals
  4. Cell Phone
  5. i730
  6. User manual
Motorola iDEN i730 User Manual

Motorola iDEN i730 User Manual

Iden digital multi-service data-capable phone
Hide thumbs Also See for iDEN i730:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Motorola
iDEN
Digital Multi-service Data-capable Phone
i730 Phone User's Guide
@NNTN4760A@
NNTN4760A

Advertisement

Table of Contents
loading

Related Manuals for Motorola iDEN i730

Summary of Contents for Motorola iDEN i730

  • Page 1 Motorola iDEN Digital Multi-service Data-capable Phone i730 Phone User’s Guide @NNTN4760A@ NNTN4760A...
  • Page 3 Loss of certain features will result when using a SIM card from one of the following models: i30sx, i35s, i50sx, i55sr, i58sx, i60c, i80s, i85s, i88s, i90c, i95cl series, and the i2000 series. For more information on SIM card compatibility, go to www.motorola.com/iden/support.

  • Page 5: Table Of Contents

    Contents Getting Started... 1 Battery ... 3 Activating Service ... 6 Powering On and Off ... 6 Enabling Over-the-Air Security ... 6 Finding Your Phone Number ... 7 Phone Basics ... 8 Locating Your SIM Card ... 12 SIM Card Security... 12 Accessories ...
  • Page 6 Viewing Call Forwarding Settings ... 34 Ring Tones ... 35 Setting Your Phone to Vibrate ... 35 Assigning Ring Tones to Contacts... 36 Ring and Vibrate ... 36 Viewing Ring Tone Assignments ... 36 Downloading More Ring Tones ... 36 Managing Memory ...
  • Page 7 GPS Enabled ... 61 IMPORTANT: Things to Keep in Mind ... 61 Making an Emergency Call ... 62 Viewing Your Approximate Location ... 63 Enhancing GPS Performance... 64 Updating Satellite Almanac Data ... 66 Setting Privacy Options ... 67 Using GPS with Map Software ... 68 Voice Records...
  • Page 8 Exposure... 107 Electro Magnetic Interference/Compatibility 110 Medical Devices... 110 Operational Warnings ... 111 Operational Cautions ... 112 Accessory Safety Information ... 113 MOTOROLA LIMITED WARRANTY... 115 Limited Warranty Motorola Communication Products (International) ... 119 Patent and Trademark Information... 123 Index... 125...
  • Page 9 DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product: Product Name: i730 Model Number: H63XAN6RR4AN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a),...

  • Page 11: Getting Started

    Getting Started volume controls Push-To-Talk (PTT) button audio jack accessory connector speaker light sensor (in back) microphone...
  • Page 12 Getting Started Power button. Navigation key — press the arrows to scroll through menus and lists. OK key — selects highlighted item; answers calls. Menu key — accesses context-sensitive menus. Option key — selects the option appearing above it on the display. Send key —...

  • Page 13: Battery

    Battery Removing the Battery Door 1 Make sure the phone is powered off. 2 Slide the release button back until it releases the battery door. 3 Allow the battery door to pop up, slide it forward, and remove it from the back of your phone. Inserting the Battery 1 Remove the battery door.

  • Page 14: Charging The Battery

    Getting Started 3 Replace the battery door and press it gently until you hear a click. Charging the Battery Your phone comes with a battery charger. 1 Plug the charger into an electrical outlet. 2 Open the connector cover. connector cover 3 Plug the other end of the charger into the accessory connector.

  • Page 15: Charging Times

    Mid-Rate 3 hours 4 hours Battery Use and Maintenance • The Motorola iDEN Approved Lithium Ion chargers provide optimum performance. Other chargers may not fully charge the iDEN Lithium Ion battery or may yield a reduced number of lifetime charge cycles.

  • Page 16: Activating Service

    Getting Started Activating Service The first time you power on your phone, you must be in your local calling area. This activates your service. Powering On and Off The first time you power your phone on, screen may appear asking you to update your browser information.

  • Page 17: Finding Your Phone Number

    Note: If you press A under Later, you will be prompted to enable security each time you power on your phone until you press A under Ok. 2 Press A under Ok. 3 You are prompted to enable security. Press A under Yes.

  • Page 18: Phone Basics

    Getting Started • Ckt — Your circuit data number is the number you use if you want to use your phone to transfer circuit data. See “Using Your Phone as a Modem” on page 78. You receive this number from your service provider. •...

  • Page 19: Menu Key

    In this guide, this symbol > tells you to select a menu or list item. For example, Settings > Security means: 1 Scroll to Settings on the main menu. 2 Press O to see the Settings screen. 3 Scroll to Security. 4 Press O to see the Security screen.
  • Page 20 Getting Started Ring Tones Assign ring tones and turn VibeAll ringer off. See page 35. list of ring tones Vibrate Silent VoiceRecord Record and play audio messages. See page 71. My Info View personal phone information, including phone number and Private ID.

  • Page 21: Status Icons

    Status Icons Status icons appear at the top of the display. Some appear at all times. Others appear only when your phone is engaged in certain activities or when you have activated certain features. Battery Strength — A fuller battery abcd indicates a greater charge.

  • Page 22: Locating Your Sim Card

    Getting Started Locating Your SIM Card Your SIM (Subscriber Identity Module) card is a small piece of white plastic located in the SIM card holder in the back of your phone, underneath the battery. If your SIM card is not in the SIM card holder, it may be in the box your phone came in, attached to a piece of white plastic about the size of a credit card.

  • Page 23: Changing The Pin

    Important: If you enter your PIN incorrectly 3 times, your SIM card is blocked. To unblock your SIM card, you must contact your service provider. See “Unblocking the PIN”. 1 When the Enter SIM PIN Code screen appears, enter your SIM PIN. An asterisk appears for each character entered.

  • Page 24: Inserting And Removing Your Sim Card

    Getting Started Important: If you unsuccessfully enter the PUK code 10 times, your SIM card is permanently blocked and must be replaced. If this happens, all data is lost. You will get a message to contact your service provider. Except for making emergency calls, your phone will not function with a blocked SIM card.

  • Page 25: Accessories

    Inserting Your SIM Card 1 With your phone powered off, remove the battery door and battery. See “Removing the Battery” on page 5. 2 Hold your SIM card as shown. Do not touch the gold-colored area. cut corner 3 Carefully slide your SIM card to into your phone, until it lines up with the marks above and below the SIM card holder.

  • Page 26: For More Information

    Getting Started To order additional accessories, log on to our Web site at www.motorola.com/store/iden or contact your Motorola Authorized Retailer. For More Information If you have questions about your i730 phone, contact your sales representative or your service provider.

  • Page 27: Making Calls

    Making Calls Your i730 phone makes two types of calls: digital cellular phone calls and Private calls. With Private calls, you use your phone as a long-range, digital walkie-talkie. Phone Calls With the Flip Open 1 Enter the number you want to call. 2 To place the call: Press s.

  • Page 28: Receiving Calls

    Making Calls Receiving Calls Phone Calls When you receive a phone call, your phone rings, vibrates, or lights up its backlight. Answering If the flip is closed, press t. -or- Open the flip. -or- Press s. -or- Press O. -or- Press A under Yes.

  • Page 29: From Contacts

    • Use a TTY device — see “Making TTY Calls” on page 79 From the Recent Calls List The recent calls list stores the last 20 calls you made or received. With the Flip Open 1 From the main menu, select Recent Calls. 2 Scroll to the name or number you want to call.

  • Page 30: Redialing The Last Number

    Making Calls 3 Highlight or select the event containing the number you want to call. For details, see “Making Calls From Datebook” on page 53. Redialing the Last Number Press and hold s to place a call to the last phone number you called.

  • Page 31: Missed Phone Calls

    Missed Phone Calls When you miss a call, this icon of phone calls you have missed appear briefly. With the Flip Open If you want to dismiss the missed call message, press A under Back. -or- If you want to view the missed call on the recent calls list, press A under View.
  • Page 32 Making Calls When you make an emergency call, your phone’s GPS Enabled feature can help emergency service personnel find you, if you are in a location where your phone's GPS antenna has established a clear view of the open sky and your local emergency response center has the equipment to process location information.

  • Page 33: Call Alerts

    Call Alerts Sending a call alert lets the recipient know you want to talk to him or her on a Private call. When you send a call alert, the recipient’s phone emits a series of beeps and displays your name or Private ID.
  • Page 34 Call Alerts Viewing Call Alerts 1 From the main menu, select Call Alert. 2 Scroll through the list. Viewing Date and Time To view the date and time a call alert was received: 1 From the main menu, select Call Alert. 2 Select the call alert you want information on.

  • Page 35: Recent Calls

    Recent Calls The recent calls list stores the numbers of the 20 most recent calls you have made and received. If the number of a recent call is stored in Contacts, the name associated with the number appears on the recent calls list. An icon appears beside the name or number indicating the Contacts type of the number used in the call.

  • Page 36: Deleting Recent Calls

    Recent Calls 2 Press A under Store. -or- If Store is not one of your options: Press m. Select Store. Tip: If Store is not on this menu, the number is already stored in Contacts. 3 To store the number as a new entry, select [New Contact].

  • Page 37: Contacts

    Contacts Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses. Information stored in Contacts is saved on your SIM card. A Contacts entry contains: • A name — A name is required if your are storing more than one number or address to the entry;...

  • Page 38: Viewing Contacts

    Contacts Note: You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See “Creating Pauses and Waits” on page 31. • A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number.

  • Page 39: Creating Entries

    To set Contacts to show all entries: 1 From the Contacts list, press m. 2 Select Filter. 3 Set this option to Show All. Creating Entries A number or address and a Contacts type are required for all Contacts entries. Other information is optional.

  • Page 40: Storing Numbers Faster

    Contacts 7 If you want to add more numbers or addresses to the entry: Scroll past the information you already entered. Enter the additional information for the entry using step 2 through step 6. You must assign a name to the entry, if you have not already.

  • Page 41: Editing Entries

    6 If you want to add more information to the entry, follow the applicable instructions in “Creating Entries” on page 29. 7 Press A under Done. Editing Entries 1 From the Contacts list, scroll to the entry you want to edit. 2 Press A under Edit.

  • Page 42: International Numbers

    If you plan to use the information stored in Contacts with an i2000, i2000plus, or any other GSM phone, you must purchase CompanionPro. Go to www.motorola.com/idenupdate or your service provider’s web site for more information. You can use CompanionPro to make the Contacts information saved to your i730 phone’s SIM card...

  • Page 43: Call Forwarding

    Call Forwarding Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently. Forwarding All Calls When you set your phone to forward all calls, an icon appears in the top row of the display:...

  • Page 44: Forwarding Missed Calls

    Call Forwarding All your calls are now sent to your phone. Calls you miss are forwarded according to the options set for missed calls. By default, missed calls are forwarded to voice mail. Note: To receive voice mail messages, you must first set up a voice mail account with your service provider.

  • Page 45: Ring Tones

    Ring Tones To set the ring tone your phone makes when you receive phone calls, message notifications, or call alerts: 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Scroll through the list of ring tones and select the one you want to assign.

  • Page 46: Assigning Ring Tones To Contacts

    Downloading More Ring Tones If you want to use other ring tones, you can download them into your phone for a fee. Go to www.motorola.com/idenupdate for a selection of custom ring tones and downloading instructions. Note: Ring tones purchased from this web site may be downloaded only once.

  • Page 47: Managing Memory

    Managing Memory To view the amount of memory available for custom ring tones: 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Highlight any ring tone. 4 Press m. 5 Select Memory Usage. Deleting custom ring tones frees memory.
  • Page 48 Ring Tones...

  • Page 49: Messages

    Messages To access your voice mail messages, text and numeric messages, Net alerts, and any other types of messages you are able to receive, go to the message center: 1 From the main menu, select Messages. 2 Select the type of message you want to access. The message center shows how many messages you have of each type.

  • Page 50: Voice Mail

    Messages Voice Mail Note: To receive voice mail messages, you must first set up a voice mail account with your service provider. When you receive a voice mail message, New Voice Mail Message appears on the display. Press A under Call. To dismiss the message notification: If the flip is closed, press ..

  • Page 51: Net Alerts

    Receiving a Message When you receive a text and numeric message, this icon appears on the display. To view the message: 1 Press A under Read. 2 If the message fills more than one screen, scroll to read it. 3 To keep the message, press O. -or- To delete the message, scroll to the end of the message, then press A under Delete.
  • Page 52 Messages...

  • Page 53: Mobile Originated Text Messaging

    Mobile Originated Text Messaging With mobile originated text messaging, you can send and receive short text messages to and from other iDEN phones. Messages you receive appear on your phone’s display and in the text message inbox. You access these messages through the message center.

  • Page 54: Reading Messages From The Message Center

    Mobile Originated Text Messaging To view the message: Press A under Read. To dismiss the message notification: Press A under Exit. Reading Messages From the Message Center 1 From the main menu, select Messages > Text Inbox. 2 Select the message you want to read. -or- Press the number of the message you want to read.

  • Page 55: Using Quick Notes

    When you are finished, press O. 4 If you want to send the message, press O or press A under Send. -or- To delete the message without sending it, press A under Cancel. -or- If you want to request confirmation of delivery, save the message as a draft, or set the sending method, press m.

  • Page 56: Resending Messages

    Mobile Originated Text Messaging Using Drafts When you save a message as a draft, it is saved in the drafts folder. To edit a draft: 1 From the main menu, select Messages > Drafts. 2 Select the draft you want to edit. 3 To edit the fields you want to change, follow step 2 through step 4 in “Creating and Sending Messages”...

  • Page 57: Sorting Messages

    Sorting Messages You can sort messages in your inbox by sender, time and date, and status. You can sort messages in your outbox by recipient, time and date, and status. 1 From the main menu, select Messages > Text Inbox or Messages > Text Outbox. 2 Highlight any messages.
  • Page 58 Mobile Originated Text Messaging...

  • Page 59: Datebook

    Datebook Datebook stores up to 250 events. You can store events over a 13 month period — 12 months after and 1 month before the current date. A Datebook event contains: • A subject — A name you assign to the event. You can also enter a phone number, Private ID, or Talkgroup number here.

  • Page 60: Creating Events

    Datebook 2 Select the event. To change the current view: 1 While viewing Datebook, press m. 2 Select the view you want. Navigating Datebook To scroll through Datebook: Scroll left and right using the navigation key. -or- In week view and month view, press * or #. To see more in day view: Scroll up and down using the navigation key.
  • Page 61 3 If you want to assign a location to the event: Select Location. Enter the location. See “Entering Text” on page 87. -or- Enter a phone number, Private ID, or Talkgroup number. After the event is stored, you can call this number.

  • Page 62: Editing Events

    Datebook Assigning More Options To assign more options before storing an event: 1 If you have created a reminder for the event and want to set the ring tone for that reminder: Select Ring Tone. Select the ring tone you want from the ring tones stored in your phone.

  • Page 63: Receiving Reminders

    5 If the event is not a recurring event, press O or press A under Yes to confirm. -or- If the event is a recurring event: Select This Event Only to delete only the event selected in step 2. Select Repeat Event to delete all occurrences of the event.

  • Page 64: Customizing Datebook Setup

    Datebook To make a call or send a call alert: 1 Highlight or select the event containing the number you want to call or send a call alert to. 2 To make a phone call: Press s. -or- Press m. Select Call # in Event. To make a Private call or group call: Press and hold the PTT button on the side of your phone.

  • Page 65: Java Applications

    Java Applications Your phone arrives with Java applications installed and ready to run. You can download and install more Java applications. Note: Using Java applications may cause your phone to use up more battery power than other uses of your phone. Running Applications To run an application that has a shortcut on the main menu:...

  • Page 66: Ending Applications

    Suspended Apps screen. Downloading Applications If you want to run more Java applications, you can download them into your phone. Go to www.motorola.com/idenupdate for a selection of Java applications and downloading instructions. Installing Applications Before running most applications you have downloaded, you must install them.

  • Page 67: Managing Memory

    6 When your phone has finished deleting the application, press A under Done. To delete all Java applications: 1 From the main menu, select Java Apps. 2 Scroll to Java System. 3 Press m. 4 Select Delete All. 5 Press O or press A under Yes to confirm. Managing Memory To view the amount of memory available for Java applications:...

  • Page 68: Java Applications And Gps Enabled

    Java Applications 2 Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it. 3 Scroll to the application you want to remove the shortcut for. 4 Press O. 5 Press A under Done.
  • Page 69 When a Java application requests access to the location of your phone, a screen appears informing you. To deny this request: 1 Press A under Deny. The application does not access the location of your phone. 2 Select the denying option you want: •...
  • Page 70 Java Applications • Ask — When the application requests access to the location of your phone, you are prompted to grant or deny permission (see “Granting or Denying Permission” on page 58). • Never — When the application requests access to the location of your phone, the request is denied without notifying you.

  • Page 71: Gps Enabled

    GPS Enabled Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature.

  • Page 72: Making An Emergency Call

    GPS Enabled • When your GPS antenna is covered (for example, by your hand or other object) or facing the ground • In temperature extremes outside the operating limits of your phone Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may...

  • Page 73: Viewing Your Approximate Location

    GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center.

  • Page 74: Enhancing Gps Performance

    GPS Enabled • The number of satellites used to calculate the location. In general, more satellites make for better accuracy. To calculate your location again: Press A under Rfrsh. It may take your phone several minutes to complete the process of determining your location. During this time, a message usually appears on your phone’s display saying your phone is scanning for satellites.
  • Page 75 To improve accuracy and increase your chances of a successful calculation, do the following while your phone is determining your approximate location: • Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky.

  • Page 76: Updating Satellite Almanac Data

    GPS Enabled • Stand still. If possible, stand still until your phone is finished determining your location. Moving your phone at a walking pace while your phone is calculating your approximate location may substantially decrease GPS performance. • In a car. When using the GPS Enabled feature in a car, position your phone so that the GPS antenna has good access to GPS signals through the car’s windows.

  • Page 77: Setting Privacy Options

    Setting Privacy Options Your phone’s GPS privacy options control whether Java applications on your phone or other software applications may view the location of your phone.You may set your phone to one of these GPS privacy options. Note: Privacy options do not apply to the transmission of location information during emergency 911 calls.

  • Page 78: Using Gps With Map Software

    GPS Enabled To change your GPS PIN: 1 From the main menu, select Settings > Security > Change Password > GPS PIN. 2 Enter the current GPS PIN. Note: When you receive your phone, your GPS PIN is 0000. 3 Press A under Ok. 4 Enter the new 4- to 8-digit GPS PIN.
  • Page 79 Getting Started To connect your phone to your laptop or other device: 1 Open the connector cover. connector cover Using GPS with Map Software 2 With the phone’s display facing up, insert the data cable’s connector into the accessory connector, until you hear a click.
  • Page 80 GPS Enabled • Stop bits: 1 • Flow control: Hardware To set your phone to send location information to your laptop or other device: 1 From the main menu, select GPS > Interface. 2 Set NMEA OUT to On. Your phone is now sending location data to your laptop or other device.

  • Page 81: Voice Records

    Voice Records A voice record is a recording you make with your phone and can play back. You can record notes to yourself or phone calls. Your phone can store up to 20 voice records. Creating Voice Records To record a note to yourself: 1 From the main menu, select VoiceRecord >...

  • Page 82: Deleting Voice Records

    Voice Records 5 Press O. Deleting Voice Records To delete a voice record: 1 From the main menu, select VoiceRecord. 2 Scroll to the unlocked voice record you want to delete. 3 Press m. 4 Select Delete. 5 Press O or A under Yes to confirm. To delete all voice records: 1 From the main menu, select VoiceRecord.

  • Page 83: Advanced Calling Features

    Advanced Calling Features Call Waiting Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call. If you are on a call and receive a second call, your phone emits a tone and displays a message saying you are receiving a second call.

  • Page 84: Putting A Call On Hold

    Advanced Calling Features Putting a Call on Hold 1 While on an active call, press m. 2 Select Hold. If you want to make the call active again, press A under Resume. Calling 2 People Putting a Call on Hold, Making a Second Call 1 Place or receive a phone call.

  • Page 85: Creating Pauses And Waits While Dialing

    Creating Pauses and Waits While Dialing You can enter a pause or wait while dialing a number. For more information on pauses and waits, see “Creating Pauses and Waits” on page 31. To create a pause while dialing a phone number: 1 From the keypad, enter the digits you want to occur before the pause.

  • Page 86: Setting Flip Actions

    Advanced Calling Features To set your phone to call a Private ID you choose: 1 From the main menu, select Settings > 2-Way Radio > One Touch PTT > Assigned Number. 2 To enter the Private ID you want your phone to call every time you press the PTT button: Enter the number using your keypad.

  • Page 87: Call Timers

    Joining a Talkgroup Your sales representative or your service provider establishes Talkgroups for you and assigns each Talkgroup a Talkgroup number. You can choose a name for each of your Talkgroups when you create entries for them in Contacts. To receive group calls made to a Talkgroup, you must join the Talkgroup.

  • Page 88: Using Your Phone As A Modem

    Advanced Calling Features • Phone Reset — keeps a running total of your phone call minutes, until you reset it. • Phone Lifetime — displays the total minutes of all your phone calls. • Prvt/Grp Reset — keeps a running total of all of your Private and group call minutes, until you reset it.

  • Page 89: Making Tty Calls

    2 With the phone’s display facing up, insert a data cable’s connector into the accessory connector, until you hear a click. 3 Insert the data plug into the COM port of the other device. When used as a modem, your phone has these data transfer modes: •...
  • Page 90 Advanced Calling Features TTY device features such as Turbo-Code, High-Speed, and Interruption are not supported by your phone. These features must be turned off or disabled to use your TTY device with your phone. Turning On the TTY Feature Your phone’s TTY feature must be on if you want to make TTY calls, set the TTY mode, or change the TTY baud rate.
  • Page 91 Making TTY Calls To change the TTY baud rate: 1 From the main menu, select Settings > Phone Calls > TTY > Baud. 2 Select the baud rate for your location.
  • Page 92 Advanced Calling Features...

  • Page 93: Memo

    Memo Memo lets you store a number, make a call to that number, and save it to Contacts. To create a memo: 1 From the main menu, select Memo. 2 Enter the number using your keypad. 3 Press O. To view the memo later: 1 From the main menu, select Memo.
  • Page 94 Memo...

  • Page 95: Shortcuts

    Shortcuts Shortcuts lets you access most menu options by pressing a number on your keypad or saying the voice name of the shortcut. You create the shortcut and then use it to take you to that screen any time. Creating a Shortcut 1 Go to the menu item you want to create a shortcut for.

  • Page 96: Deleting Shortcuts

    Shortcuts 6 Scroll to the place where you want the shortcut to appear. 7 Press A under Insert. 8 Repeat step 4 through step 7 for all the items you want to move. 9 Press A under Done. To change the number or voice name assigned to a shortcut: 1 From the main menu, select Shortcuts.

  • Page 97: Entering Text

    Entering Text You can enter text into your phone using the traditional method of pressing a key several times for each character, or by pressing a key once for each letter while words likely to be the one you want are chosen from a database.

  • Page 98: Special Function Keys

    Entering Text The displayed word may change as you type it. Do not try to correct the word as you go. Type to the end of the word before editing. 3 If the word that appears is not the desired word, press 0 to change the word on the display to the next most likely word in the database.

  • Page 99: Using Numeric Mode

    Punctuation Press 1 or 0 to insert punctuation. Continue to press the key to view the list of symbols available through that key. Pause to select the symbol you want. Note: Additional punctuation symbols are available in Symbols mode. Using Numeric Mode 1 Select Numeric as your text input mode.
  • Page 100 Entering Text...

  • Page 101: Customizing Your Phone

    Customizing Your Phone Setting the Volume Of the Earpiece and Speaker 1 From the main menu, select Settings > Volume. 2 Scroll to Earpiece to set the earpiece volume. -or- Scroll to Speaker to set the speaker volume. 3 To set the volume: Scroll left or right.

  • Page 102: Using Settings

    Customizing Your Phone Note: If you are using your phone with a headset, and you have the Flip to End option set to On, closing your flip sends incoming sound to the headset and does not end the call. See “Setting Flip Actions” on page 76. Using a Remote PTT Button If you are using a headset or other accessory with a remote PTT button, you can use the remote PTT...

  • Page 103: Phone Calls Features

    • Language — sets the language that your phone displays. Phone Calls Features The Phone Calls menu controls how your phone handles phone calls: • Set Line — sets phone line 1 or phone line 2 as the active line for outgoing calls. •...
  • Page 104 Customizing Your Phone Personalize Features The Personalize menu makes main menu items easier to access. • Menu Options — Reorder Menu lets you change the order of the items on the main menu by grabbing and moving them; Add/Remove Apps lets you create a shortcut to a Java application on the main menu.

  • Page 105: Security Features

    Security Features The Security menu lets you turn security features on and off and change passwords: • Phone Lock — turns on a feature that locks your phone, either immediately or automatically after a set period of inactivity. An unlock code is required to enable this feature, to unlock the phone, and to set a new Unlock code.
  • Page 106 Customizing Your Phone • Phone Only — prevents your phone from making or receiving Private calls or group calls, or transferring data. • Baud Rate — sets the baud rate at which your phone communicates with a laptop computer, PC, or similar device.

  • Page 107: Profiles

    Profiles A profile is a group of settings saved together so that you can apply them to your phone easily. A profile contains these settings: • Ring Tones — sets all options described in “Ring Tones” on page 35, except assigning ring tones to Contacts.

  • Page 108: Temporary Profiles

    Profiles When you do this, your phone either: • Updates the profile in effect to reflect these changes, without notifying you -or- • Creates a temporary profile that contains these changes Note: This feature may not be offered by your service provider.

  • Page 109: Creating Profiles

    2 Scroll to the temporary profile. 3 Press m. 4 Select Store As New. 5 Enter the name you want to give the profile. See “Entering Text” on page 87. When you are finished, press O. To overwrite the profile that temporary profile is based on: 1 From the main menu, select Profiles.

  • Page 110: Setting Call Filtering

    Profiles 4 Select Delete. 5 Press O or press A under Yes to confirm. To delete all profiles: 1 From the main menu, select Profiles. 2 Press m. 3 Select Delete All. 4 Press O or press A under Yes to confirm. Setting Call Filtering The call filtering setting in each profile lets you control which calls, call alerts, and message...
  • Page 111 • All sets your phone not to sound a tone or vibrate when you receive any message. Note: When you receive a type of message you have set not to sound a tone or vibrate, the messages notification screen appears as usual.
  • Page 112 Profiles...

  • Page 113: Understanding Status Messages

    Understanding Status Messages You may receive status messages under certain conditions. Before contacting Customer Care, note the message, numeric code, and the conditions under which it appeared. The following table lists and describes the status messages. Note: When your phone cover is closed, the one-line display screen shows a shortened version of the status messages displayed in the full-sized screen.
  • Page 114 Understanding Status Messages Status Status Message Description Messages Messages (one-line (full-sized display) display) You have entered an Wrong PIN incorrect PIN number. You have inserted a SIM Please Enter card that will not work with Special Code a your service provider phone.
  • Page 115 Status Status Message Description Messages Messages (one-line (full-sized display) display) Could not find GPS Unable to satellites. Locate Sats Technical Error A problem occurred in your phone’s GPS circuitry. If this error occurs, contact Customer Care.
  • Page 116 Understanding Status Messages...

  • Page 117: Safety And General Information

    Portable Radio Product Operation and EME Exposure Your Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME): •...

  • Page 118: Phone Operation

    “IN USE”. Holding the antenna affects call quality and may cause the radio product to operate at a higher power level than needed. Approved Accessories For a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.mot.com/iden.
  • Page 119 The SAR information reported to the FCC includes the FCC-accepted Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.

  • Page 120: Electro Magnetic Interference/Compatibility

    Safety and General Information Electro Magnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so.

  • Page 121: Operational Warnings

    Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Use While Driving Check the laws and regulations on the use of radio products in the area where you drive.

  • Page 122: Operational Cautions

    Safety and General Information other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio”.

  • Page 123: Accessory Safety Information

    Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners.
  • Page 124 Safety and General Information • The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet. • Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way;...

  • Page 125: Motorola Limited Warranty

    PURCHASED IN THE UNITED STATES OR CANADA What Does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc. warrants its Motorola iDEN Digital Mobile and Portable Handsets ("Products"), Motorola-branded or certified accessories sold for use with these Products ("Accessories") and...
  • Page 126 (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage. Use of Non-Motorola Products and Accessories.
  • Page 127 Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable. What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty.
  • Page 128 Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted.

  • Page 129: Limited Warranty Motorola Communication Products (International)

    80% of rated capacity, or b. the battery develops leakage. MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or...
  • Page 130 PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY...
  • Page 131 Product or parts infringe a patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are...
  • Page 132 Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished...

  • Page 133: Patent And Trademark Information

    Patent and Trademark Information MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. Reg. U.S. Pat. & Tm. Off. © 2003 ® Motorola, Inc. All rights reserved. Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation.
  • Page 134 Patent and Trademark Information...

  • Page 135: Index

    Index Numerics 2-way radio 93 see also Private calls, group calls, and call alerts 3-way calling 74 Accessories 15 safety 113 Alpha mode 87 Backlight 92 Battery care 5 charging 4, 5 door 3 inserting 3 safety 112 Baud rate 96 Call alerts 23 deleting 24 queue 23...
  • Page 136 Index searching 28 showing all entries 29 showing only Private IDs 28 SIM card 27 storing fast 30 storing from idle screen 30 storing from Memo 30, 83 storing from recent calls 25, type 25, 27 viewing 28 voice name 30 with non-i730 phones 32 Datebook 19 Display...
  • Page 137 Lists, see menus Memo 83 calling from 83 creating 83 editing 83 storing to Contacts 30, 83 viewing 83 Memory Java applications 57, 72 mobile originated text messaging 47 ring tones 37 voice records 72 Menu key 2, 9 Menus 8 context-sensitive 2, 9 main menu 9 Message notifications 39...
  • Page 138 Index deleting 26 display time 95 icons 25 storing to Contacts 25, 30 viewing 25 Redialing 20, 93 Ring tones 27, 35 deleting 37 downloading 36 memory 37 off 35 setting 35 setting in Contacts 29, 36 vibrate 35 viewing assigned 36 Ringer 91 see also Ring tones off 91...
  • Page 139 setting up 34, 40 Voice name 20, 28 creating 30 Voice records 71 creating 71 deleting 72 labelling 71 locking 72 memory 72 playing 71 Volume, setting 91, 94 Waits dialing 75 storing 31 Warranty 119 Word mode 87...
  • Page 140 Index...

  • Page 141: Driving Safety Tips

    • Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.
  • Page 142 Driving Safety Tips • Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies. • Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to...

This manual is also suitable for:

I730 - southernlinc

Table of Contents