Motorola iDEN i870 User Manual page 154

Bluetooth ®
Bluetooth ® Bonds
A bond is an encryption key that is generated when
two Bluetooth devices exchange a common PIN.
This key verifies the identity of each device, and
encrypts any data transferred between the devices.
Once the PIN is exchanged, the devices do not
have to be in discoverable mode in order to
exchange information. You only need to create a
bond once between two devices.
If you search for devices and you select a device
that you are currently bonded with from the list of
found devices, then the current bond with that
device will be voided. You will have to re-establish
the bond.
Your i870 requires that you create a bond in order
to connect with another device. However, you can
choose to establish bonds with devices without
connecting.
Note: Devices are automatically granted
permission during the 10 seconds after
bonding.
Bluetooth ® PINs
Bluetooth devices exchange PINs in order to
establish encrypted transfers between them. When
prompted, enter the Bluetooth PINs.
142
Some Bluetooth devices ship with Bluetooth PINs.
Please refer to your Bluetooth device's user guide
to locate this information.
If a device ships without a Bluetooth PIN, then you
can enter any PIN for that device. To establish a
connection to that device, enter the same PIN for
both your phone and the device. For example, if
you enter 1234 as the device's PIN, then enter
1234 as your phone's PIN.
To create a bond between your phone and another
device:
1 From the main menu, select Bluetooth.
2 If you want to create a bond and connect with
the given device, select Hands Free > [Find
Devices]. -or-
If you want to create a bond to have it available
for future use, select Link to Devices.
3 Select the device you want.
4 Press A under Yes if you are prompted to do
so.
5 Enter a PIN.
6 Press A under OK.
7 If necessary, enter the same PIN for the other
device.
8 Select Bond if you are prompted to do so.