Motorola H800 Quick Start

motorola
Slider
Bluetooth Headset
®
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H800 Headset.
Microphone
H800
Get connected in 4 quick steps.
3
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
1
Guide Number: 6809506A84-A
2
3
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
4
accessories may be prohibited or restricted in certain areas.
5
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2007.
1
BEFORE YOU BEGIN
1
Open charger port cover and plug the Motorola
charger into the charging port on the headset.
Note: Your headset has a micro USB charging port. If using
a mini USB charger, utilize the included micro USB adapter
when charging (shown on right).
Call
Charging Port
Button
(other side)
Multi-Color
Volume
Indicator Light
Buttons
With Micro USB Charger
The indicator light turns red when the battery is
charging. It may take up to 1 minute for the
indicator light to turn on. When the headset's
battery is 80% charged, the indicator light turns
Speaker
yellow. When charging is complete (about 2
Slider Lock (other side)
Slider
hours), the indicator light turns green.
Switch
2
Disconnect charger and close charger port
cover.
Note: Headset is not functional while charging.
4
PAIR
CONTINUED
Your Phone
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
For most Motorola phones:
1
Place the headset over your ear.
Menu >
On your Motorola phone, press ( )
M
Settings > Connection > Bluetooth Link >
2
On the phone, dial the number you want to
Handsfree > Look for Devices.
call and press SEND key on your phone.
The phone lists Bluetooth devices it finds.
3
If your phone and headset are successfully
paired, you will hear ringing on the headset.
Select Motorola H800.
Select OK or Yes to pair your headset with
After you have successfully paired your
your phone.
phone and headset, you don't need to
Enter the passkey: 0000
repeat these steps. For daily use, ensure
that your headset is turned ON and that
Select OK.
your phone's Bluetooth feature is ON.
When your headset successfully pairs with
your phone, the indicator light flashes purple
To save battery power, turn OFF the
and blue.
headset when you don't use it for an
extended time by closing the slider.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
2
CHARGE

START BLUETOOTH

Your Headset's Battery
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
1 Menu
Press M (
Bluetooth Link > Setup.
2
Scroll to Power.
With Mini USB Charger and
Micro USB Adapter
3
Select Change.
4
Scroll to On.
5
Press Select
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.

TEST AND USE

USING YOUR H800

Functions Guide
on the reverse side
for information on
using your H800
3
FEATURE
Your Phone
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
> Settings > Connection >
) Power on headset by pressing the Call button
to initiate easy pairing. After a few moments,
the indicator light will be steadily lit in blue to
indicate headset is in pairing mode.
Indicator Light
(steadily blue
for pairing mode)
to turn on the Bluetooth
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.

TROUBLESHOOTING

My headset will not enter pairing mode.
See
Make sure that any devices previously paired
Features and
with the headset are turned off. If the indicator
light is flashing in blue, first turn off the other
device, then turn your headset off and on. The
indicator light becomes steadily lit in blue
indicating the headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport
PAIR
Your Headset