Test And Use - Motorola HF800 Quick Start Manual

4
Your Handsfree Device
Before you can use your handsfree device, you
must pair (link) it with your phone.
Step A - PUT THE HANDSFREE DEVICE IN
PAIRING MODE
Volume/Power Button
Press and quickly release the Volume/Power
1
button.
The Call button LED indicator turns on and
remains steadily lit.
If the Call button LED indicator is flashing or
2
does not remain steadily lit, repeat these steps.
PAIR
4
Step B - SET THE PHONE TO LOOK FOR YOUR
HANDSFREE DEVICE
For most Motorola phones:
1 On your Motorola phone, select
Settings > Connection > Bluetooth Link > Handsfree >
Look for Devices.
The phone lists all Bluetooth devices it finds.
2
Select Motorola HF800 or HF820.
3
Select OK or Yes to pair (bond) the device.
4
Enter the passkey: 0000
5
Select OK.
When pairing is successful, the Call button LED
changes from steadily lit to flashing.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
PAIR
Call Button LED
CONTINUED
Your Phone
M
Menu
(
Support.
If you need more help, contact us at
1-877-MOTOBLU.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
1-800-461-4575 (Canada)
Guide Number: 6809492A68-O
MOTOROLA and the Stylized M Logo are registered in the US Patent
& Trademark Office. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other product
or service names are the property of their respective owners.
© Motorola, Inc. 2005.
5
Your phone and handsfree device are now paired
and ready to make and receive calls.
To confirm they are successfully paired and
>
)
operating properly, make a call:
1 On your phone, dial the number you want to call.
2
Press Send to make the call. If your phone and
handsfree device are successfully paired, you will
hear ringing.
After you have successfully paired your phone
and handsfree device, you do not need to repeat
these steps.

TEST AND USE