Oil Pressure Test - Polaris RANGER 500 2018 Service Manual

Hide thumbs Also See for RANGER 500 2018:

Table of Contents

ENGINE / COOLING SYSTEM

OIL PRESSURE TEST

1. Attach the Oil Pressure Gauge Adapter to the Oil

Pressure Gauge.

Oil Pressure Gauge Adapter: PU-50569

Oil Pressure Gauge: PV-43531

2. Remove the seats and engine service panel.

3. Clean the area around the main oil gallery plug

located on the oil filter adapter housing.

4. Remove the plug and insert the oil pressure adapter.

5. Start engine and allow it to reach operating

temperature, monitoring gauge indication.

Test results are based on the use of the recommended

engine oil (Polaris PS-4) at operating temperature, and

may vary considerably if any other oil is used or if

engine is not up to temperature.

6. Upon assembly, torque the crankcase gallery plug to

specification.

9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual

Oil Gallery Plug:

11 ft-lbs (15 Nm)

Table of Contents