Table of Contents
Advertisement
Chapter 3
Moxi Remote
The Moxi remote allows you to access, control, and enjoy the many
features of your Media Center. You can also use this remote as the
primary remote for many brands of TVs and audio devices. Instructions in
this chapter show you how. Refer to the Moxi Viewer's Guide for
explanations of the buttons.
Your cable operator may provide a different remote. If your remote does
not look like the one pictured here, refer to the manual your cable
operator provided with the remote.
NOTE
When replacing batteries, use only high quality, non-corrosive
batteries designed for use in electronic equipment.
Programming Procedure
The Moxi remote operates the BMC, and—once programmed—will
simultaneously control the power, volume, and mute functions of your
TV or audio receiver. Use the following instructions to program the
remote.
From the tables on the following pages, find the codes for your brand of
TV or audio receiver and use this information with the "Programming by
Code" procedure below. If your brand is not listed or if the given codes
do not work, follow the instructions in the "Programming by Search"
procedure on page 14.
Programming by Code
1. Turn on the TV or receiver you want the remote to control.
2. On the Moxi remote, press and hold the MOXI and OK buttons simultaneously until the LED light
on the top of the remote blinks twice.
3. Using the number buttons on the remote, enter one of the codes for your device from the
reference tables starting on page 14. When you enter the correct code, the LED blinks twice. (If it
blinks once, the code was invalid—try again.)
4. Press the Power button on the remote. If the TV or receiver does not respond, repeat steps 2 and
3 using another listed code. Repeat until successful, or use the Programming by Search procedure.
NOTE
To reset the remote to the original factory setting, enter code 9 9 9 9, and then press OK in
step 3 above.
Moxi Remote
Figure 10: Moxi Remote
13
Advertisement
Table of Contents
