Bluetooth Headset - Motorola DC800 Quick Start

3
PAIR WITH

BLUETOOTH HEADSET

Enable your stereo adapter to transmit music to
your Bluetooth wireless headphone:
Note: This guide does not provide steps for pairing your
stereo adapter with a Bluetooth USB PC Adapter or a
Bluetooth-enabled PC. Consult the USB Adapter or PC's
user guide for details on completing this step.
1 Holding your headphone close to the
stereo adapter, place the headset into
pairing mode.
If using the Motorola HT820 Bluetooth
Stereo Headphone, place in pairing mode
by pressing and holding the headphone's
Call button for approximately 6 seconds
until the indicator light is solidly lit. For
other products, refer to your headset's
user's guide for details.
2
Turn on the stereo adapter by pressing in
the Power button. After a few moments,
the Pairing Button indicator light begins
blinking to indicate the power is on.
PAIR WITH BLUETOOTH
3
HEADSET
CONTINUED
Pairing Button with
Indicator Light
3
Press and hold the Pairing button on the
stereo adapter until the indicator light
remains solidly lit (about 5 seconds).
The stereo adapter searches for Bluetooth
devices. When the stereo adapter finds the
headphone, the indicator light rapidly flashes
indicating that pairing is successful.
Once the connection is established, the
indicator light changes to a slower, pulsing
light.
Power Button
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
1-800-461-4575 (Canada)
Part Number: 6809494A97-C
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The Bluetooth trademarks are
owned by their proprietor and used by Motorola, Inc. under
license. All other product or service names are the property of
their respective owners.
The use of wireless devices and their accessories may be
prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.
© Motorola, Inc. 2005.
PAIR WITH
4
BLUETOOTH PHONE
Enable your stereo adapter to receive music
from the built-in MP3 player of your Bluetooth
A2DP-capable phone:
Note: These steps are for most Motorola phones. Certain phones
require additional steps to enable stereo audio streaming (A2DP
Profile). See your phone's user's guide to verify proper steps.
1 Turn on the stereo adapter by pressing in the
Power button. After a few moments, the
Pairing button indicator light begins blinking
to indicate the power is on.
From the phone, perform a Bluetooth device
2
discovery while holding it close to the adapter.
The phone lists Bluetooth devices it finds.
3
Select Motorola DC800.
Select OK or Yes to pair your stereo adapter
4
and phone.
5 Enter the passkey: 0000
6
Select OK. The Pairing button indicator light
flashes rapidly to indicate pairing is successful.