Table of Contents
Advertisement
Installation Overview
1
Locate the antenna and screw it into the top-right corner of the sensor, just above the air vents, until it is secure.
Note: Sharp objects should be stored out of reach of children to prevent injury.
2
Insert the batteries. On the bottom of the sensor, slide open the door and insert two AAA alkaline batteries
back of the battery d
oor of the sensor indicates the polarity (+ and -) of the batteries. Close the door after
inserting batteries.
The sensor does not suppor
power saving functionality.
3
Reg
ister your sensor with your Wireless System:
a.
In the homesight software, click System Se
b.
Select "Device Discovery"
c.
Select "Start Discovery."
d.
Locate the Discovery hole on the sensor (indicated
the Discovery Tool to depress the hidden button.
e.
After a few seconds, the Sy
will appear
on the screen.
4
Mount the sensor.
t rechargeable NiCad or NiMH batteries. However, the sensor does employ built-in
ttings.
from the menu.
stem Controller will find and register your sensor, and details of the device
3
by "Discovery" and an arrow on the device) and use
. The
Advertisement
Table of Contents
