Siemens SITRANS LG250 Operating Instructions Manual page 47

Probe type
Special parameters
Device name
Instrument version
Factory calibration date
Profibus Ident Number
Sensor characteristics
PBD-51041053
In this menu item you can select the type and size of your probe from
a list of all possible probes. This is necessary to adapt the electronics
optimally to the probe.
In this menu item you gain access to the protected area where
you can enter special parameters. In exceptional cases, individual
parameters can be modified in order to adapt the sensor to special
requirements.
Change the settings of the special parameters only after having con-
tacted our service staff.
6.4.5 Info
In this menu, you read out the instrument name and the instrument
serial number.
In this menu item, the hardware and software version of the sensor is
displayed.
In this menu item, the date of factory calibration of the sensor as well
as the date of the last change of sensor parameters are displayed via
the display and adjustment module or via the PC.
In this menu item, the Profibus ident number of your sensor is dis-
played.
In this menu item, the features of the sensor such as approval, pro-
cess fitting, seal, measuring range, electronics, housing and others
are displayed.
Example for displayed sensor features.
SITRANS LG250 - Operating Instructions
47