NEC E421 User Manual page 13

Please make sure to connect the
power plug to the wall outlet socket
after connecting the display to the
power cord!
1. Install the base stand;
place the display on a solid
surface.
Ensure that the display is
placed in a position to allow
the ventilation openings on the
back cover. Do not place the
such as a lighted candle or
Avoid heat, direct sunlight and
exposure to rain or water. Do
not expose the equipment to
any liquid.
2. Connect the antenna cable or
CATV cable to the aerial socket
at the back of the
display.
E321
E421
3. Remote control:
Remove the cover of the
battery compartment. Insert the
2 batteries supplied (Type AAA
1.5V).
4. Power cord installation
Min
1 m
installed close to an easily
accessible power outlet.
the power outlet socket.
A loose connection may
cause image degradation.
If there is power to the display
the front LED at the bottom of
the display will be either blue
or red. A blue LED means the
display is powered on. A red
LED means the display is in
standby mode.
5. Power:
Press the power key on the
remote control or press the
power button located on the
side of the display. The display
will power on.
English-9
Power Key
Power
Video Comp PC/HDMI TV