NEC MT1055 Installation Data

MT1055/1056 Installation Data
with Optional MT10RL Rear Lens
Contents
Product Description, Lens Specs, Notes and Formulas
Projection Distances and Screen Sizes
Rear Projection Installation
Other Applications
Rear Projection Systems
Cabinet Dimensions
Top, Front and Right Side
Bottom, Back and Left Side
Control Codes

Product Description

Type: 3 panel, 1.3" p-Si TFT w/MLA LCD projector
Native Resolution: 1024 x 768
Brightness: 3000 ANSI Lumens (2600 for MT1055)
MT10RL Lens Specifications
Throw Ratio: 1.0 : 1 (approx)
°
Offset Angle: 0
Screen Sizes: 40 – 300" Diagonal
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
The ceiling must be strong enough to support the LCD projector and the installation must be in accordance with any local
building codes.
•
All calculations are based on 4:3 aspect ratio.
•
Distances are in inches, for millimeters multiply by 25.4.
• Distances may vary ±5%.
Formulas
Units: Inches (for millimeters multiply final number by 25.4)
Definitions:
H = Horizontal Screen Width (4:3)
V = Vertical Screen Height (4:3)
C = Throw distance
α = Throw Angle
Projection Formulas:
C = 1.0190H – 2.468
°
α = 0
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Dimensions: 11.1"(W) x 5.3"(H) x 16.9"(D) (
Weight:
Manual Focus/Manual Zoom
Focal Length: 27mm
F/#:
Screen Formulas (4:3):
H = Screen Diagonal x 4/5
V = Screen Diagonal x 3/5
Screen Diagonal = H x 5/4
NEC Solutions (America), Inc.
17.4 lbs
(w/lens installed)
2.3
Visual Systems
v 3.0
w/lens installed)
Page 1