Operating Blade Coffee Grinder - KitchenAid 9KCG111 Manual

OPERATING BLADE COFFEE GRINDER

Before First Use
Wash bowl and top cover in hot, soapy
water. Rinse and dry. Handle the blade
gently. Bowl and top cover can also be
washed in the dishwasher (top rack only).
To Use Blade Coffee Grinder:
1. Be sure the Coffee Grinder is
unplugged. Make sure the inside of
the top cover is free of coffee grinds or
residue.
2. Secure the bowl to the motor housing
by placing the bowl on top and turning
clockwise to lock into place.
3. A scale is provided inside the bowl for
the KitchenAid recommended amount of
beans to grind for 4, 8, 10, and 12 cups
of coffee. Fill the bowl to your desired
cup size with 4 cups minimum or 12 cups
maximum level. Various bean blends and
bean sizes can cause differences in fill
level and grind times.
4. Position the top cover over the bowl so
that the lid's latch aligns with the motor
housing base and the side guides fall
into place.
NOTE: Make sure both cover and bowl are
in position; otherwise, the Coffee Grinder
will not operate.
5. Plug power cord into electrical outlet.
6. Press down on the top cover to start
processing. For optimum grinding
results, do not pulse the top cover.
Do not grind continuously for more
than 30 seconds. See the the suggested
grinding times in the "Suggested
Grinding Chart" in the "Coffee grinding
tips" section.
8 |OPERATING BLADE COFFEE GRINDER
W11263272A.indd 8
©2018 All rights reserved.
Specifications subject to change without notice.
7. To stop processing, release pressure on
the top cover.
8. Unplug the Coffee Grinder.
9. Wait until the blade has stopped
rotating and remove top cover.
10. Unlock bowl by turning it
counterclockwise. Remove bowl from
the motor housing.
11. Pour out ground coffee.
10/18/2018 1:56:26 PM