Bosch Access Modular Controller 2 Manual page 11

Access Modular Controller 2
Figure 3.4: Interfaces - overview
Figure 3.5: Jumper (back)
Bosch Security Systems B.V.
12 RS-485 extension module bus
13 External tamper contact
14 Connector for power supply
15 Wiegand interfaces for card readers
16 Connectors for analog inputs
17 Connectors for relay outputs
18 Jumper for setting either voltage free relay output ("dry" mode) or looped-in voltage
from the AMC internal power supply ("wet" mode).
19 Jumper: Equalization of potential between different systems and earth ground
(shield) for the extension interface.
Руководство по установке
Introduction | en 11
2022-11 | V05 |