Rs-232C Port Specifications; Power Mode Status - NEC E322 User Manual

8� USB/SERVICE – Insert USB storage device to view photos and listen to
the music� /This USB slot is for future software upgrades�
9� RS-232C – Input from external equipment such as a PC or AV control
system in order to control RS-232C functions�
Once your AV device is connected, press the Source button on the remote
control to select the relevant source to view� (ex: Press COMP button to select
"Component" if you have connected a source to the Component input�)

RS-232C Port Specifications

PC control of the TV
Attach an RS-232C cable cross-type (commercially available) to the supplied
Din/D-Sub RS-232C for the connections�
Note: This operation system should be used by a person who is accustomed
to using computers�
Communication conditions
Set the RS-232C communication settings on the PC to match the TV's
communication conditions�
The TV's communication settings are as follows:
Baud rate:
Data length:
Parity bit:
Stop bit:
Flow control:
Communication procedure
Send the control commands from the PC via the RS- 232C connector�
The TV operates according to the received command and sends a response
message to the PC�
Do not send multiple commands at the same time� Wait until the PC receives
the response before sending the next command�

Power Mode Status

LED
Mode
Status
On
Blue
Power
Purple
Saving
Standby Red
Power saving support automatically power on when signal appear�
Standby to power on by touch up remote or keypad power button�
9,600 bps
8 bits
None
1 bit
None
VGA AV
v v
v -
v v
English-16
Component HDMI 1-3
v
-
v
TV
v v
- -
v v