Table of Contents
Advertisement
Setting up the FastMile 5G Gateway 3
Connecting the FastMile 5G Gateway 3
Place the FastMile 5G Gateway 3 on a flat surface, such as a tabletop or similar;
close to a window, and near an electrical outlet. Minimize the number of obstructions
as much as possible.
If using the power adapter that requires an AC cable, connect the AC cable to the
power adapter. Plug the other end of the AC cable into the electrical outlet.
If using the power adapter that mounts directly to the wall, plug the 48W power
adapter into the electrical outlet.
Note: Ensure that no cables are blocking the air flow on the bottom of the FastMile 5G
Gateway 3 to avoid overheating.
Starting the FastMile 5G Gateway 3
After the FastMile 5G Gateway 3 is connected to a power source, start the device by
pressing the On/Off button on the back of the unit.
The LCD screen backlight turns on and several seconds later the booting screen
appears on the LCD display indicating that the FastMile 5G Gateway 3 is starting up.
After waiting awhile, the LCD screen runs through an animation sequence and the
FastMile 5G Gateway 3 goes through its initialization sequence.
Note: The Wi-Fi Mobile App can be used to provide step-by-step installation instructions,
along with guidance for additional tasks such as how to configure Wi-Fi settings and how to
add Wi-Fi Beacon 2 devices to the Wi-Fi network. The app can be downloaded to a smart
phone from app stores as instructed by the LCD screen when the FastMile 5G Gateway 3
is started up for the first time.
LCD screens
The LCD screens on top of the device display information about the FastMile 5G
Gateway 3. This section describes the screens available on the LCD after successful
pairing.
20
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
User Guide for Oceania
3TG-02288-AAAA-TCZZA-02
Hide quick links:
Advertisement
Table of Contents
