Disassembly - Pioneer DVR-RT400-S Service Manual

5

7.8 DISASSEMBLY

1. REMOVAL OF MECHANICAL PARTS AND P.C. BOARDS
1-1: TOP CABINET AND FRONT CABINET
(Refer to Fig. 1-1)
1. Remove the 5 screws 1.
2. Remove the Top Cabinet in the direction of arrow (A).
3. Unlock the 10 supports 2.
4. Remove the Front Cabinet in the direction of arrow (B).
5. Disconnect the following connector: (CP681).
6. Remove the 3 screws 3.
7. Remove the Operation PCB in the direction of arrow (C).
Top Cabinet
1
Front Cabinet
(B)
2
3
2
2
3
2
3
2
2
2 Operation PCB
2
2
2
1-2: FLAP (Refer to Fig. 1-2)
1. Open Flap to 90° and flex in direction of arrow (A), at
the same time slide in direction of arrow (B).
2. Then lift in direction of arrow (C).
(C)
(B)
5
6
1
1
1
(A)
1
Fig. 1-1
(A)
Flap
Fig. 1-2
DVR-RT400-S
6
7
1-3: DECK DVD AND DVD MPEG PCB
(Refer to Fig. 1-3)
1. Remove the 6 screws 2.
2. Disconnect the following connectors:
(CP504, CP1703, CP8301,CP8302, CP8303).
3. Remove the Deck DVD Block in the direction of arrow
(B).
4. Remove the 2 screws 1.
5. Remove the Deck Shield Assy in the direction of arrow
(A).
6. Remove the 4 screws 3.
7. Remove the MPEG Shield in the direction of arrow (C).
8. Disconnect the following connector: (CP4001).
9. Remove the DVD MPEG PCB in the direction of
arrow (D).
10. Remove the 2 screws 4.
11. Remove the DVD Angle (L) in the direction of arrow (E).
12. Remove the 2 screws 5.
13. Remove the DVD Angle (R) in the direction of arrow(F).
2
2
2 4
4
(E)
DVD Angle (L)
(A)
1
Deck Shield Assy
1
(C)
3
3
7
8
Deck DVD
2
(F)
2
2
(D)
5
5
DVD Angle (R)
DVD MPEG PCB
MPEG Shield
3
3
(B)
Fig. 1-3
8
A
B
C
D
E
F
95