Logitech UE 600vi Getting Started

600
vi
Getting started with
Logitech® UE 600vi
Noise-Isolating Earphones + Mic
快速入门
Logitech® UE 600vi
具备噪音消除功能的耳机 + 麦克风
2
English
Attach the ear cushions
1. Attach the ear cushions to the earphone
port tubes.
2. Push the ear cushion past the rib on
the port tube. The rib holds the cushion
securely in place.
简体中文
套上耳塞
1. 将耳塞套到耳机听筒上。
2. 将耳塞推过听筒上的凸纹。凸纹能够牢固
地固定耳塞。
4
600
vi
Getting started with
Logitech® UE 600vi
Noise-Isolating Earphones + Mic
快速入门
Logitech® UE 600vi
具备噪音消除功能的耳机 + 麦克风
3
English
Wear the earphones
1. For active use, try wrapping the cable around your ear.
When sitting, let the cable fall freely, as shown in the picture.
2. Gently insert the earphone (marked "R") in your right ear.
Gently insert the earphone marked "L" in your left ear.
Never remove an earphone from your ear by pulling on its cable.
3. For over-the-ear wear, gently pull the cable tight to remove any slack
in the cable.
简体中文
佩戴耳机
1. 如果要频繁使用耳机，可将耳机线绕在耳部。坐下时可让耳机线
自然垂悬，如图所示。
2. 请将带有"R"标记的耳机轻轻插入您的右耳。请将带有"L"
标记的耳机轻轻插入您的左耳。从耳朵上取下耳机时，切勿拉扯耳
机的连接线。
3. 绕耳佩戴时，轻轻将耳机线拉紧，以避免其松弛。
1
English
Choose an ear cushion size
XXS
1. Choose an ear cushion size from
double-extra small (XXS) to large (L).
XS
2. Or choose a Comply™ Foam Tip.
S
3. Selecting the right cushion provides
a comfortable fit and good sound quality.
M
简体中文
L
选择耳塞尺寸
1. 可选耳塞尺寸为
Comply™
超小号 (XXS) 到大号 (L)。
Foam Tips
2. 也可选择 Comply™ 海绵耳塞。
3. 选择合适的耳塞，可以让佩戴更加舒适，
音质更好。
English
Connect the earphones to an audio source
Connect the earphones to an audio source with a 3.5 mm input jack.
简体中文
将耳机连接到音源
通过 3.5 毫米输入插孔，将耳机连接到音源。
5
English
Use the garment clip
Hook the clip to the cable. Clip the cable
to your clothing to keep the cable in place.
简体中文
使用衣夹
将衣夹钩在耳机线上。将耳机线夹在
衣衫上，以使其固定。