Installation; Connection Of Cables - Sony Magnescale LH51 Instruction Manual

3. Installation

3-1. Connection of Cables

Fasten the connecting cables to stationary members to prevent accidental disconnection. Be sure
to turn off the power of the display unit before connecting or disconnecting the connector.
First axis scale
Second axis scale
Third axis scale
!
For safty sake, be sure to connect the supplied power cord in between ground terminal of unit and ground.
Example: Connection of LH52
Z -axis
2
Note
Be sure to put the supplied dust cap on unused connector.
SIGNAL IN 1
SIGNAL IN 2
SIGNAL IN 3
REMOTE
RESET
R
Z -axis
1
To AC outlet – AC 100 to 120 V
X-axis
!
TOUCH
SENSOR
SIGNAL IN 1
SIGNAL IN 2
!
SIGNAL IN 3
REMOTE TOUCH
RESET SENSOR
R
or – AC 220 to 230 V
Ground wire
Remote reset switch
X-axis
Shielded cable
Z-axis
Power supply
Ground terminal
Touch sensor (LH51 only)
Remote reset
5