Related Manuals for HP JG587A
Summary of Contents for HP JG587A
- Page 1 HP MSR Survivable Branch Communication Module powered by Microsoft Lync Quick Start Guide 5998-3753 Part number: 5998-3753 Document version: 6PW103-20130420...
- Page 2 The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
-
Page 3: Table Of Contents
Getting started ·································································································· 9 Obtaining connectivity to the HP MSR SBM ················································· 9 Accessing the HP MSR SBM on its domain name ······························· 9 Obtaining the initial management IP address ···································· 10 Configuring the HP MSR SBM ······································································ 12 ... - Page 4 Websites ································································································ 42 Conventions ···································································································· 42 Index ··············································································································· 43 ...
-
Page 5: Hardware Installation
Microsoft Lync™ is a branch office survivable voice server for the Microsoft Lync solution. The HP MSR SBM is an HP MSR application running on a HP MSR Open Architecture Platform (OAP) Module. The module is installed in an HP MSR 30 Series or MSR 50 Series Router at the branch office. -
Page 6: Installing The Hp Msr Sbm
Comware Software, Version 5.20, Release 2209, Standard Copyright (c) 2010-2012 Hewlett-Packard Development Company, L.P. HP A-MSR30-40 uptime is 1 week, 0 day, 7 hours, 21 minutes If the router software is out-of-date, update it: To install new software, see HP MSR Software Release Notes. -
Page 7: Installing The Module
You can install or remove a FIC-OAP module while the HP MSR50 router is on. The MIM-OAP module and MIM-OAPS module are not hot-swappable. You must turn off the HP MSR30 router before installing or removing the MIM-OAP or MIM-OAPS module. -
Page 8: Verifying The Installation
Verifying the installation If you have installed the module in a powered off HP MSR router, power up the router. After the router powers up, the module will begin to power up. If you have installed the module in a powered on HP MSR50 router,... - Page 9 CAUTION: Do not remove the module or interrupt the power up process in any way. The boot process may take several minutes to complete. You can determine when this process is complete by viewing the SYS status LED, which slowly flashes in green color when the module is ready. Figure 4 MIM-OAPS module front panel LEDs and ports 6 5 4 (1) USB port...
- Page 10 Figure 5 MIM-OAP module front panel LEDs and ports 6 5 4 (1) USB port (2) 100/1000Base-T Ethernet port LED (3) LINK/ACT LED for the GigabitEthernet port (4) Standby button (5) System status LED (SYS) (6) Disk LED (DISK) (7) GigabitEthernet port Figure 6 FIC-OAP module front panel LEDs and ports (1) 100/1000Base-T Ethernet port LED (2) LINK/ACT LED for the GigabitEthernet port...
- Page 11 Table 1 GigabitEthernet management port specifications Specification Item OAPS Connector type RJ-45 Port type MDI/MDIX auto-sensing • 10/100 Mbps, half/full duplex Port transmission rate • 1000 Mbps, half duplex Ethernet_II Frame format Ethernet_SNAP Table 2 Maximum OAP modules MIM-OAP MIM-OAPS Router model FIC-OAP modules modules...
- Page 12 NOTE: The value 0 in Table 2 indicates that the router does not support the module.
-
Page 13: Getting Started
Therefore, after installing the OAP module, obtain connectivity to the HP MSR SBM's management interface, and then you can access the HP MSR SBM and install the system by using the Setup Wizard. You have two choices for reaching the HP MSR SBM: on its domain name or IP address. -
Page 14: Obtaining The Initial Management Ip Address
• Viewing the initial management IP address from the DHCP server The serial number of the HP MSR SBM is the default host name of the HP MSR SBM. You can query the assigned IP address by viewing the host name displayed on the DHCP server. - Page 15 You can view the initial management IP address, mask, and gateway assigned by the DHCP server. If the HP MSR SBM has received a self-assigned IP address beginning with 169.254, check the network configuration to make the DHCP server assigns a valid IP address.
-
Page 16: Configuring The Hp Msr Sbm
RTCUniversalSBATechnicians group member. After obtaining the initial domain name or valid management IP address of the HP MSR SBM, you can complete the initial configurations of the HP MSR SBM system using the Setup Wizard. Initial access to the HP MSR SBM... -
Page 17: Initial Access To The Hp Msr Sbm
• you complete a step, you cannot return to that step.The process is a forward-only process. During the configuration, if you need to reboot the HP MSR SBM system, • continue your last configuration after re-login. Initial access to the HP MSR SBM Launch the Web browser Windows IE 8.0, IE 9.0, or Mozilla Firefox. -
Page 18: Resetting The Local Administrator's Password
The initial user name and password is SBMAdmin and P@ssw0rd respectively. Resetting the local administrator's password After logging in to the HP MSR SBM for the first time, you need to reset the local administrator's password, as shown in Figure To reset the password: Enter user name, old password, new password, and confirm password. -
Page 19: Displaying The Welcome Page
If you do not want to reset the password, leave the fields blank and click Skip. Figure 8 Resetting the local administrator's password Displaying the welcome page After resetting the password, you access the installation process page, which introduces the whole installation process in general, as shown Figure Click Next to access the next page. -
Page 20: Configuring Ip Settings
Figure 9 Displaying the welcome page Configuring IP settings To make the HP MSR SBM to successfully contact the data center to which the Lync server belongs, you need to configure IP settings shown in Figure This page presents the current system configuration. - Page 21 Put the cursor on the question mark to get help. • CAUTION: If you specify a new IP address, you will lose the current connection to the HP MSR SBM. In this case, use the new IP address to re-connect to the HP MSR SBM.
-
Page 22: Configuring The System Time
Figure 11 IP Configuration Configuring the system time If the HP MSR SBM's time differs from that of the domain controller's (the Windows Active Directory), the HP MSR SBM cannot join the domain and other functions will fail. Therefore, the HP MSR SBM must be set with the correct time. -
Page 23: Adding The Hp Msr Sbm To A Domain
Figure 12 Configuring the system time Adding the HP MSR SBM to a domain To make the HP MSR SBM to work with other servers in the Lync topology, you must correctly set the computer name. On the page shown in... -
Page 24: Preparing For Joining To The Lync Topology
Figure 13 Adding the HP MSR SBM to a domain Preparing for joining to the Lync topology After the HP MSR SBM is added to the domain, the web interface displays the operations for you to complete before asking your Lync... - Page 25 Perform Lync Server Replication area when you installing the Lync server. For how to add the HP MSR SBM to the Lync branch and deliver the Lync • topology, see related documentations of Microsoft Lync server.
- Page 26 Figure 15 Preparing for joining to the Lync topology 2 Figure 16 Preparing for joining to the Lync topology 3...
-
Page 27: Installing The Lync Server
HP MSR SBM. Access the Lync installation page, the system automatically installs the SQL express and Lync server components, and automatically synchronizes the Lync server's topology, as shown in... - Page 28 Figure 19. After the problem is solved, click Restart Automated Replication to continue the installation or click Manual Replication to manually upload Lync server topology file containing the information of the HP MSR SBM.
- Page 29 Figure 19 Installing the Lync server 2 After completing the synchronization and activating Lync services, click Next.
-
Page 30: Configuring The Certificate
Figure 20 Installing the Lync server 3 Configuring the certificate The certificate page provides four methods for you to configure the HP MSR SBM certificates, as shown in Figure... - Page 31 Certificate Authority Account (optional)—The account that is authorized • to get the certificate. For example, the domain name that you use to access the HP MSR SBM, or a valid user of an organization that issues certificates. Certificate Authority Password (optional)—Password of the CA account.
- Page 32 Figure 22 Automatically requesting a certificate The left column displays the operation results. Figure 23 Request results-succeeded...
- Page 33 Figure 24 Request results-failed Manually requesting a certificate To manually request a certificate, complete four steps. Provide the information as shown in the following figure. Figure 25 Manually requesting a certificate 1...
- Page 34 Click Generate the Request. Then copy the generated certificate request to manually request a certificate. Figure 26 Manually requesting a certificate 2 Manually generate a certificate on the certificate server, and then save the certificate locally. Upload the saved certificate. Figure 27 Manually requesting a certificate 3 The left column displays the operation results.
- Page 35 Figure 28 Import results-succeeded Figure 29 Import results-failed...
-
Page 36: Configuring The Pstn Gateway
The HP MSR SBM runs on a HP MSR OAP Module. The PSTN gateway working with the HP MSR SBM can be a voice card on the same MSR or a voice card on another MSR. You can configure the gateway through the... -
Page 37: Starting Lync Services
Figure 32 PSTN configuration NOTE: The maximum lengths of the user name and password are 55 and 63 respectively. Starting Lync services The Next button grayed out initially and become available after you click Start Lync Services. When the Next button is available, click it to access the dashboard page. -
Page 38: Managing And Monitoring The Hp Msr Sbm
Figure 33 Starting Lync services Managing and monitoring the HP MSR Launch the dashboard The page displays the current configuration summary of the HP MSR SBM, including computer name, system time zone, system time, and the IP address of the external interface. - Page 39 Figure 34 Summary Click Launch the SBA Dashboard to access the dashboard page. After this configuration, when you log in to the HP MSR SBM, you can only access this page, and the administrator can monitor the HP MSR SBM...
- Page 40 35, to facilitate your management, the HP MSR SBM dashboard page provides the following areas: SYSTEM—In this area, you can shut down and reboot the HP MSR SBM, • Upgrade HP MSR SBM Dashboard and view the HP MSR SBM logs. If you click Shutdown SBA or Reboot SBA, the operation will be executed immediately.
-
Page 41: Logging Out
Logging out You can log out of the HP MSR SBM in the bottom left corner on any page, as shown in the following figure. Figure 37 Logout... - Page 42 After logging out, you can use the domain administrator or domain account to re-log in to the HP MSR SBM. CAUTION: If you do not click any button on the dashboard page for 20 minutes, you will be logged out automatically. After that, you can log in again by using the domain account and password of a RTCUniversalSBATechnicians group member or those of the domain administrator.
-
Page 43: Troubleshooting
Ethernet port, which cannot be used. HP customer support services HP offers support 24 hours a day, seven days a week through the use of a number of automated electronic services. See the Customer Support/Warranty booklet that came with the product for information on how to use these services to get technical support. -
Page 44: For More Information About The Lync Server
For more information about the Lync Server For more information about the Lync server, see Microsoft Lync server materials or visit Microsoft website. -
Page 45: Support And Other Resources
Related information Documents To find related documents, browse to the Manuals page of the HP Business Support Center website: http://www.hp.com/support/manuals For related documentation, navigate to the Networking section, and •... - Page 46 For a complete list of acronyms and their definitions, see HP FlexNetwork • Technology Acronyms. Websites HP.com http://www.hp.com • HP Networking http://www.hp.com/go/networking • HP manuals http://www.hp.com/support/manuals • HP download drivers and • software http://www.hp.com/support/downloads HP software depot http://www.software.hp.com • HP Education http://www.hp.com/learn...
- Page 47 Index A C D F H I L O P R S V W Installing the module,3 Accessing the HP MSR SBM on its domain name,9 Launch the dashboard,34 Adding the HP MSR SBM to a Logging out,37 domain,19 Obtaining the initial management...