Check
4-2.Network cable connection
Connect a network cable (twisted pair cable) connector to N8804-005 adapter's LAN port.
Twisted pair cable types that you can use for this product are listed by communication grades.
Connector
Cable type
Standard
Length of cable
4-3.Driver installation
It is necessary to install LAN driver corresponding to each operating system to use this
product. Please refer to "User's Guide" of the computer.
The method of installing and removing the PCI card and the location of the
PCI slot differ in different computers. Please read the user's manual of
the computer for confirmation.
If this product is not correctly connected to the PCI slot of the computer,
remove the product and connect it again. Using excessive force can lead
to damage.
RJ45
Twisted-pair cable( UTP / STP )
4-pair
EIA/TIA Standard conforming
*The quality of the cable demanded by the transmission rate used is
different.
10Base-T
100Base-TX
1000Base-T
Up to 100meters
- 33 -
CAT 3 or better
CAT 5 or better
CAT 5e or better