4. DISASSEMBLY AND REPLACEMENT
/ADJUSTMENT
4. 1 Covers
[A] Front cover
(1) Pull out the drawer.
(2) Remove 4 screws and take off the front cover.
When installing the front cover, fit the arm on the
Note:
latch lever.
[B] Rear cover
(1) Remove 4 screws and take off the rear cover.
[C] Upper cover
(1) Pull out the drawer.
(2) Remove the rear cover.
(3) Loosen 4 screws and take off the upper cover.
JUNE 2002 © TOSHIBA TEC
Front cover
Rear cover
Upper cover
4 - 1
MP-4003 DISASSEMBL Y AND REPLACEMENT
Arm