Table of Contents
Advertisement
Quick Links
* The above illustration is of this product mounted to an optional projector.
Thank you for purchasing this Panasonic product.
■ To ensure correct use of this product, please read the instructions supplied with this product and the projector carefully.
■ Before using this product, be sure to read "Read this first!" ( pages 3 to 4).
■ Please save this manual for future use.
Operating Instructions
Floor Stand Kit
ET-JPF200BE
Model No.
ET-JPF200WE
Commercial Use
ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
PУССКИЙ
ENGLISH
DPQX1150ZB/X1
Advertisement
Table of Contents
Related Manuals for Panasonic ET-JPF200BE
Summary of Contents for Panasonic ET-JPF200BE
- Page 1 * The above illustration is of this product mounted to an optional projector. Thank you for purchasing this Panasonic product. ■ To ensure correct use of this product, please read the instructions supplied with this product and the projector carefully.
-
Page 2: Table Of Contents
Contents Read this first! ....................3 Product composition ..................5 Before mounting ....................6 Mounting procedure ..................7 Main procedures ......................... 7 Changing the orientation of the main unit of the projector ..........7 Mounting the floor stand to the projector ................8 Connecting the power cord to the projector .............. -
Page 3: Read This First
Read this first! WARNING Do not do anything that might damage the power cord or the power plug. If the power cord is used while damaged, electric shocks, short-circuits or fire will result. z Do not damage the power cord, make any modifications to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle. - Page 4 L or coloured RED. How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse. „ Panasonic Connect Co., Ltd. assumes no responsibility for any accident or damage caused „ by improper installation or incorrect handling.
-
Page 5: Product Composition
There are rubber feet at three places on the bottom of the stand. The stand comes in two colors. ET-JPF200BE: Black ET-JPF200WE: White Power cord This is connected to the <AC IN> socket of the optional (K2CM3YY00038) <1>... -
Page 6: Before Mounting
Before mounting ■ Use this product to install a compatible projector (not supplied) on the floor in a standing position. Compatible projectors: PT-JX200FBE / PT-JX200FWE ■ A work bench and a soft cloth to prevent scratches are required when mounting this product to a projector. -
Page 7: Mounting Procedure
Mounting procedure Main procedures The main procedures up until installation of the projector are as follows. For details on 1) to 3), refer to the corresponding reference pages. 1) Changing the orientation of the main unit of the projector ( page 7) 2) Mounting the floor stand to the projector (... -
Page 8: Mounting The Floor Stand To The Projector
Mounting procedure (continued) Mounting the floor stand to the projector This section describes mounting the floor stand to the projector. 1) Place the projector on the work bench. Power supply unit z Place the power supply unit of the projector on Soft cloth or alike a work bench that has a soft cloth or the like laid on it. - Page 9 Mounting procedure (continued) 4) Slide the floor stand. Power supply unit z Slide the floor stand so that the tab fits into place into the <AC IN> socket side of the power supply unit of the projector. <AC IN> socket 5) Secure the floor stand with the screws, captive washers.
-
Page 10: Connecting The Power Cord To The Projector
Mounting procedure (continued) Connecting the power cord to the projector This section describes connecting the supplied power cord to the projector. To prevent disconnection of the power cord, use the supplied power cord and firmly insert the connector all the way into the <AC IN> socket of the projector and then secure it in place. For details on the handling of the power cord, refer to “Read this first!”... - Page 11 Mounting procedure (continued) 3) Close the connector secure lock. z Push until the tab of the connector secure lock clicks into place. ■ Power cord disconnection procedure 1) Make sure that the projector is in the standby state and then remove the power plug from the power outlet.
-
Page 12: Attaching A Security Wire
Mounting procedure (continued) Attaching a security wire If necessary, take a measure to protect the equipment against theft such as passing a commercially available security wire between the pole and cable of the projector. Cable Security wire (Commercially available product) Pole 12 - ENGLISH... -
Page 13: Specifications
Width: 352 mm (13-7/8") Dimensions Height: 19.4 mm (3/4") Depth: 438 mm (17-1/4") Weight 1.7 kg (3.75 lbs.) ET-JPF200BE: Black (for use in combination with PT-JX200FBE) Outer color ET-JPF200WE: White (for use in combination with PT-JX200FWE) Power cord length 2.0 m (78-3/4") -
Page 14: Assembly Dimension Diagram
Specifications (continued) Assembly dimension diagram These dimensions are when this product is mounted to a separately sold projector (product number: PT-JX200FBE / PT-JX200FWE). Unit: mm The main unit can rotate 360° 128.0 (5-1/16") 438.0 (17-1/4") 278.8 (11") Ball joint movable 149.2 (5-7/8") range: approx. - Page 15 MEMO ENGLISH - 15...
- Page 16 Panasonic Connect Co., Ltd. Web Site : https://panasonic.net/cns/projector/ TI1216JG1062 -PT © Panasonic Connect Co., Ltd. 2022 Printed in China...