Main Window - Huawei eNodeB User Manual

eNodeB
LMT User Guide
Connection Port Requirements
If the computer installed with the LMT cannot visit NEs because of firewalls between them,
ports 20, 21, and 80 must be enabled by the firewall. If the computer must visit NEs using the
Hypertext Transfer Protocol Secure (HTTPS), port 433 must be enabled by the firewall.
Ports 20 and 21 are used for the File Transfer Protocol (FTP). They need to be enabled in the
case of file transfer using FTP.
Port 80 is used for the Hypertext Transfer Protocol (HTTP) by default. That is, the port is used
for a web server by default.
Port 433 is used for the HTTPS by default.
Communication Capability Requirements
The computer installed with the LMT must support TCP/IP protocols.
The minimum effective network bandwidth for the LMT is 512 kbit/s. The recommended value
is 2 Mbit/s or larger.
l
provided, the LMT runs fast. If a 512 kbit/s bandwidth is provided, all the functions can be performed but
l
bandwidth, the LMT may run slowly even if a 2 Mbit/s bandwidth is provided.
2.3 Components of the LMT Main Window
This section describes the components of the LMT main window and the functions of each
component.

Main Window

Figure 2-1 shows the LMT main window of DBS3900 LTE.
Figure 2-1 LMT main window
Issue 01 (2011-09-15)
NOTE
The network bandwidth limits the web page opening speed. If the recommended effective bandwidth is
the LMT runs slowly.
The effective bandwidth is the bandwidth occupied by the LMT. If multiple applications compete for the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Introduction to the eNodeB LMT
6