Table of Contents
Advertisement
Operating the Video Display
Inputting Characters
This section describes how to input the characters.
1 When the character input screen is displayed, use the
12
jog dial (
) to select the area you wish to input.
2 Select characters using the jog dial (
• The following characters can be selected: Press
buttons to display them one by one.
Alphanumeric characters: A to Z, a to z, 0 to 9
Symbols: , . : ; ' ` - + / = % & ! ? # _ | $ ^ ~ @ { } [ ] < >
( ) space
• Characters that cannot be entered are automatically skipped.
3 Repeat steps 1 and 2 until the desired text has been input.
4 Press the jog dial when you are finished.
• The selection frame moves to [OK].
5 Check the content and press the jog dial to confirm the settings.
Reference
• When selecting [Cancel] or pressing MENU button before selecting [OK], the settings will be reset and the previous screen will be
displayed.
• To erase a character in the selection frame, press the RESET button on the video display.
or rotation).
Advertisement
Table of Contents
