LG SK5 - Wireless Sound Bar Simple Manual

Front Panel

Please read this manual carefully before operating your set and retain it for future reference.

(Standby) - Switches the unit ON or OFF
(Function) - Selects Function
(Volume) - Adjusts Volume

Subwoofer Connection

Place the wireless subwoofer near the speaker and follow steps below.

Subwoofer Connection Manually
If the subwoofer does not make sound, try to connect manually.

1. Press Pairing button on the rear of the wireless subwoofer.
   • The green LED on the rear of wireless subwoofer blinks quickly. (If the green LED does not blink, press and hold the Pairing button.)
2. Turn on the main unit.
3. Pairing is completed.
   • The green LED on the rear of wireless subwoofer turns on.

Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.

TV Connection

Connect with the Sound Bar and TV using Optical () or HDMI ARC ().

1. Optical Connection
   
   
   1. Connect the sound bar to the TV using Optical cable.
   2. Set up [External Speaker (Optical)] on your TV setting menu.
2. HDMI(ARC) Connection
   
   1. Connect the sound bar to the TV using HDMI cable.
   2. Set up [External Speaker (HDMI ARC)] on your TV setting menu.

• HDMI connection is unavailable if your TV does not support HDMI ARC.
• If this unit is connected by OPTICAL and ARC at the same time, the ARC signal is a high priority.

Additional Device Connection

1. Connect to the external device as follows.
   
   
2. Set the input source by pressing on the remote control or unit repeatedly.

Remote control

ASC/DTS V:X/BASS BLAST: Selects the sound effect.
NIGHT ON/OFF: Turns down the volume at night.
WOOFER +/-: Adjusts the volume level of subwoofer.
AUTO POWER ON/OFF: Automatically turns on by an input source.

Replacement of battery

Additional Information

Specification

Power consumption	Refer to the main label.
AC adapter	Model: DA-38A25 Manufacturer: Asian Power Devices Inc. Input: 100 - 240 V ~ 50 - 60 Hz Output: 25 V 1.52 A
Dimensions (W x H x D)	Approx. 891.0 mm X 57.5 mm X 87.8 mm With foot
Bus Power Supply (USB)	5 V 500 mA
Amplifier (Total RMS Output power)	360 W RMS

Design and specifications are subject to change without notice.

OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.