Panasonic KX-NS1000 Features Manual page 20

2.1.1 Incoming Trunk Call Features
2.1 Incoming Call Features
2.1.1 Incoming Trunk Call Features
2.1.1.1 Incoming Trunk Call Features—SUMMARY
Description
Incoming calls via a trunk (public line) are distributed to their destinations according to one of several distribution
methods.
1.
Available Networking Type for Each Card Type
Each trunk port of an optional trunk card or the mother board can be assigned a networking type: Public,
Private, or VPN (Virtual Private Network).
Card Type
Mother Board
(V-IPGW)
Mother Board
(V-SIPGW)
LCOT
BRI/PRI
ü*: Enable (default); ü: Enable
® 4.3.1 TIE Line Service
*1
® 4.3.3 ISDN Virtual Private Network (ISDN-VPN)
*2
2.
Distribution Method
One of the following methods can be assigned to each trunk port:
Method
Direct In Line (DIL)
Direct Inward Dialling (DID)
20 Feature Guide
Channel/
Protocol Type Public (DIL/DID/
H.323
SIP
—
CO
Extension
QSIG-Master
QSIG-Slave
Directs a call to a preprogrammed single destination (e.g., the
operator).
® 2.1.1.2 Direct In Line (DIL)
Directs a call with a DID number from a DID line to a preprogrammed
destination.
DID is also known as Direct Dialling In (DDI).
® 2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Networking Type
Private (TIE)
DDI/MSN)
ü*
ü*
ü*
Description & Reference
Virtual Private
*1
Network (VPN)
ü*
ü
ü*
ü*
*2