Advertisement
Auto mode
Auto indicator
About Auto mode
Intelligently determine the best mode through a variety of smart sensing devices.
In Auto mode, when the humidity reaches the set value, and the PM2.5/PM1.0 and odor reach the green level (indicator level 1), after the
machine runs for a period of time, Auto mode will Automatically enter standby mode. The Auto indicator will keep flashing to remind the
consumer that the Auto mode has not yet been exited, and will start again when the humidity is higher than the set level or the PM2.5/PM
1.0 and the odor reach the orange light level. (During standby mode, in order to obtain the latest air quality conditions, the fan will run
for 3 minutes for every 20 minutes.)
In Auto mode, the front display will be in the cycle mode; the front display will be turned off if it is in standby mode.
In the Auto mode, the air direction is Auto; if it is in the standby mode, the air direction panel will be turned off.
In the Auto mode,
In the Auto mode, full water reminder ON/OFF can be set.
In the Auto mode, press the "Power Off/On" button to end the Auto mode or switch to other functions.
(Press to
select)
(Press to
select)
is forced to start; if it is in standby mode,
To use Auto during operation
(Humidity
setting)
(Skip this step)
To use Auto during standby
(Humidity
setting)
(End Auto)
(Skip this step)
Press the
flashes).
The humidity setting lights up; press the
the humidity.
(End Auto)
If the humidity is set, wait for about 3 seconds and
automatically enter the Auto mode.
If no humidity is set, it will be automatically set with the
factory humidity setting (or the previous humidity setting).
After entering the Auto mode, the Auto indicator will be on,
and other buttons (except the humidity setting) cannot be
operated.
To leave the Auto mode, press
Press the
flashes).
The humidity setting lights up; press the
the humidity.
If the humidity is set, wait for about 3 seconds and
automatically enter the Auto mode.
If no humidity is set, it will be automatically set with the
factory humidity setting (or the previous humidity setting).
After entering the Auto mode, the Auto indicator will be on,
and other buttons (except the humidity setting) cannot be
operated.
To leave the Auto mode, press
will be turned off.
button in the standby mode (the Auto indicator
to leave Auto mode.
button in the standby mode (the Auto indicator
to leave Auto mode.
YAV28H
button to set
button to set
13
Advertisement
