Advertisement

DCB1104

Advertisement

Table of Contents
loading

Summary of Contents for DeWalt DCB1104

  • Page 1 DCB1104...
  • Page 2 English (original instructions) Copyright D WALT...
  • Page 3 Fig. A...
  • Page 4: Technical Data

    English BATTERY CHARGER DCB1104 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data DCB1104 Output 10.8, 12, 18...
  • Page 5: Important Safety Instructions For All Battery Chargers

    English Batteries DCB1104** Cat # Weight (kg) Chargers/Charge Times (Minutes) DCB546 18/54 6.0/2.0 1.08 DCB547 18/54 9.0/3.0 1.46 135* DCB548 18/54 12.0/4.0 1.46 DCB549 18/54 15.0/5.0 2.12 DCB181 0.35 DCB182 0.61 DCB183/B/G 0.40 DCB184/B/G 0.62 DCB185 0.35 DCB187 0.54 DCB189 0.54...
  • Page 6 English types of batteries may burst causing personal injury and damage. NOTICE: Under certain conditions, with the charger plugged into the power supply, the exposed charging contacts inside the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil or any buildup of metallic particles should be kept away from charger cavities.
  • Page 7 English The charger and battery pack are specifically designed to work together. • These chargers are not intended for any uses other than charging D WALT rechargeable batteries. Any other uses may result in risk of fire, electrical shock or electrocution. • Do not expose charger to rain or snow. •...
  • Page 8 English • Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorised service centre. • Do not disassemble charger; take it to an authorised service centre when service or repair is required. Incorrect reassembly may result in a risk of electrical shock, electrocution or fire.
  • Page 9: Package Contents

    Battery Battery release button Charger Intended Use The DCB1104 charger is designed for charging 18V D WALT Li‑Ion XR and XR FLEXVOLT battery packs: DCB181, DCB182, DCB183, DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185, DCB187, DCB189, DCB546, DCB547, DCB548, DCB549, DCBP034.
  • Page 10: Charging A Battery

    English DO nOT use under wet conditions or in the presence of flammable liquids or gases. These battery chargers and battery packs are professional power tools. Charging a Battery nOTE: To ensure maximum performance and life of lithium‑ion battery packs, charge the battery pack fully before first use.
  • Page 11: Electronic Protection System

    English Hot/Cold Pack Delay When the charger detects a battery pack that is too hot or too cold, it automatically starts a Hot/Cold Pack Delay, suspending charging until the battery pack has reached an appropriate temperature. The charger then automatically switches to the pack charging mode.
  • Page 12: Optional Accessories

    English Cleaning WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure. Charger Cleaning Instructions WARNING: Dirt and grease may be removed from the exterior of the charger using a cloth or soft non‑metallic brush.
  • Page 16 Belgique et www.dewalt.be WALT ‑ Belgium BVBA Tel: NL 32 15 47 37 63 luxembourg België enduser.BE@sBDinc.com Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 en luxemburg 2800 Mechelen Fax: 32 15 47 37 99 Danmark www.dewalt.dk WALT (Stanley Black&Decker AS)

Table of Contents