Related Manuals for Siemens WT46G402NL
Summary of Contents for Siemens WT46G402NL
- Page 1 Clothes dryer WT46G402NL siemens-home.bsh-group.com/welcome Register your product online...
- Page 2 In order to meet the high quality standard Attention! of the Siemens brand, the operation and flawless condition of every tumble dryer This signal word indicates a potentially that leaves our factory is carefully tested.
-
Page 3: Table Of Contents
Table of contents enInstructions for use and installation instructions Intended use....4 Operate device ..27 Laundry in the dryer Safety Instructions . -
Page 4: Intended Use
Intended use Intended use Safety instructions The following safety This appliance is intended for ■ Vei li ghei dsi instructions es Intended use information and warnings are household use only. Do not install this appliance in places provided to protect you from ■... -
Page 5: Children/People/Pets
Safety instructions Children/people/pets Warning Risk of fatal injury! Warning Children can enclose Risk of fatal injury! themselves in devices and Children and other people thus end up in a life- who are unable to assess the threatening situation. risks associated with using the Do not place the appliance appliance could injure ■... -
Page 6: Installation
Safety instructions Warning Installation Risk of poisoning! Warning Detergents and Risk of electric shock / care products can result in fire / material damage / poisoning when used damage to the device! Failure to install the device taken. correctly may result in a Consult a doctor in case of accidental ingestion. - Page 7 Safety instructions That the mains plug is freely Warning ■ accessible at all times. If it is Risk of fire / material not possible to comply with damage / damage to the the relevant regulations, a device! switch (2-pole The use of extension cords or off switch) become power strips can lead to fire...
-
Page 8: Operation
Safety instructions Warning If you use protruding parts ■ of the appliance (e.g. the Risk of injury / material appliance door) to lift or damage / damage to the move it, these parts can device! The device may vibrate or ■... - Page 9 Safety instructions Service Warning Risk of explosion/fire! Warning When residual material is ■ Risk of explosion/fire! left in the Laundry that is in contact fluff filter, it can ignite used with solvents, oil, wax, when it wax remover, paint, grease, or drying, or even cause the stain remover may ignite when unit to catch fire or explode.
- Page 10 Safety instructions Warning Warning Risk of fire / material Risk of poisoning! damage / damage to the Toxic fumes may be device! released by When a program ends before cleaning agents that contain solvents, eg cleaning drying cycle is completed, the solvent.
- Page 11 Safety instructions Warning If you use the appliance ■ without a fluff filter (e.g. Risk of burns! fluff filter, The outside of the rear panel of fluff collection unit, the appliance becomes very hot depending on the during use. Never touch the specifications of the surface of the rear panel of the appliance), or if the fluff filter...
-
Page 12: Cleaning/Maintenance
Safety instructions When the device Do not enter technical ■ ■ overheats, it may not work make modifications to properly, or it may cause the device or features of them. material damage or Repairs and others ■ damage to the device. work on the Make sure that the air inlet device may only... -
Page 13: Environmental Protection
Environmental protection Warning Environmental protection Risk of injury / material damage / damage to the Packaging/Old device device! Environmental protection The use of spare parts and Dispose of the packaging in an environmentally accessories supplied by other friendly manner. This appliance is applicable in brands is dangerous and may accordance with the European result in injury, material... -
Page 14: Tips
Place and connect Savings tips Place and connect Centrifuge the laundry before drying. ■ contents of the package Dryer laundry shortens the drying time Locationandconnection and reduces the Dryer ■ energy consumption. Operating instructions and ■ Fill the dryer with the maximum load ■... - Page 15 Place and connect Please note when placing: Attention! Risk of injury a clean, flat and firm surface, ■ You could be injured by the high ■ weight when lifting the dryer. that the plug is accessible at ■ Do not lift the dryer alone. all times, that you keep the air inlet of the ■...
-
Page 16: Optional Accessories
Place and connect Optional accessories Transport and frost protection Order the optional accessories* from the after-sales service: Empty the condensed water container: Connection set washing Set the program selector to any ■ dryer column: programme. The dryer can Select start button. space-saving on a suitable washing 5 minutes wait. -
Page 17: Drain Condensation Water
Drain condensation water Move the hose to the park position. ΠCondensate drain During drying, underwater is formed in the device. Condensate drain ne Operate the appliance with a connected drain hose. If no drain hose is used, the condensed water from the device will run into the condensed water reservoir. - Page 18 Drain condensation water Mount the drain hose with the other side, depending on the connection situation A, B or C with the rest of the accessories. Attention! Accumulated water can be sucked back into the dryer and cause damage. Check that the water drains smoothly from the sink. The drain must not be closed or clogged.
- Page 19 The most important in a nutshell The most important in a nutshell It doesn't ring a bell Switch on the dryer. Select a program and Put in the laundry the dryer and close adjust the program's presets as desired. the door. - - - - - - - - To dry.
-
Page 20: Getting To Know The Device
Getting to know the device Getting to know the device Dryer L recognizing the device ( Condensate tank 0 Control panel and display 8 Drum interior lighting (depending on model) @ Door of the dryer huh Air intake p fluff filter X Heat exchanger... -
Page 21: Panel
Getting to know the device Control panel ( Program selector for switching on and off and choosing a program. 0 Program ~ page 24. 8 Start button to start or interrupt the program ~ page 26. @ Buttons ~ page 26. huh Display of keys ~ page 22. -
Page 22: Display
Getting to know the device Display Display Buttons on the display Ý Anti-crease selected. Fine adjustment of ( degree of drying select. the degree of dryness. Time program selected. 0 Drying time select. Ready in time chosen. 8 Ready in time select. Child lock selected. -
Page 23: Laundry
laundry Clues laundry – When washing the laundry to be dried, dose detergent and care Prepare laundry products according to the laundry manufacturer's instructions. Warning Explosion and fire hazard! – Clean the humidity sensor Remove lighters and matches from the regularly ~ page 34. -
Page 24: Programs And Keys
Programs and keys Programs and keys Programs Program keys maximum load and Program and textiles program settings/Info Program name maximum load based on the dry weight of the textile For which textiles is the program suitable. possible program settings 8 kg Cotton Cupboard dry extra Multi-layer thick, sturdy and boil-resistant textiles made of cotton or linen, that dries hard. - Page 25 Programs and keys 3 kg hotyou All textiles; time program. You can adjust the program duration with the drying time button. Suitable for pre-dried or slightly damp laundry and for post- drying multi-layered, thicker laundry. Clues Dry wool, sports shoes and stuffed animals only with the wool ■...
- Page 26 Programs and keys Tests Tests Explanation and instructions Note: Not all buttons and their functions can be selected in all programs. Amendmentw If your laundry is too damp after drying, you can further set the drying targets, such as cupboard dry. The drying target can be set in three steps fromC O until CCC O to be raised.
-
Page 27: Operate Device
Operate device Select the desired program with the Operate device program selector. The display shows Laundry in the program presets for the selected Operate device turn on the dryer and switch program. it on Note: The dryer must be correctly positioned and connected, ~ page Put the laundry in the drum. -
Page 28: Sequence
Operate device Change program or Program sequence topping up laundry The program status is shown on the display. You can remove or add laundry at any time during drying and change or adjust e.g. Estimated program duration in the program. 1:27 hours and minutes. -
Page 29: Dryer
Operate device Remove the fluff from the fluff filter Take out laundry and recess. switch off dryer Remove the laundry from the machine. Turn the program selector to the Off position. Note: Make sure that no fluff falls into the open shaft. Open the fluff filter and remove all fluff. - Page 30 Operate device Condensate tank Slide the condensed water container back into the dryer until it noticeably to empty clicks into place. The condensed water from the dryer is sent to the condensed water container drained. Optionally, you can drain the condensed water into the drain via a drain hose*.
-
Page 31: Set Signal And Amps
Set signal and amps Activate setting mode Signal and amps Switch on the dryer. Set up Select the Cottons program at position 1 and wait 5 seconds. Now the setting mode is activated, the symbols appear on You can override the following settings: the display and the program duration Signal and Ampere set l en appears. -
Page 32: Cleaning
To clean The display shows the volume Cleaning for the signal from the keys. Cleaning the dryer and control panel To clean Warning Danger to life! The dryer uses electricity, there is a danger of 0 = off, 1 = soft, 2 = medium, 3 = electric shock. - Page 33 To clean Turn both locking levers towards each Remove any lint from the dryer other. and heat exchanger seals. Let the water drain completely. First slide the heat exchanger and then the attachment from the heat exchanger inside. 10.Turn both locking levers back and close the service door until the lock clicks into place.
-
Page 34: Cleaning The Humidity Sensor
To clean Clean Humidity Sensor Note: The dryer is equipped with a humidity sensor of stainless steel. Humidity sensor measures the moisture content of the laundry. After long use, a fine layer of limescale or wax residues may form care products on the Humidity sensor. These deposits must be removed regularly, otherwise the function of the sensor and thus the drying result can be... -
Page 35: Malfunctions, What To Do
Malfunctions, what to do? Malfunctions, what to do? Malfunctions Failures, what to do? Cause/Solution Ìon the display and the Empty the condensed water container and select the start button~ page 30. ■ If the optional condensate drain is installed, the drain hose drying process was ■... - Page 36 Malfunctions, what to do? Cause/Solution Malfunctions The fluff filter may be contaminated and lead to a longer drying time. ■ Drying time too long? Clean the fluff filter. If the air inlet of the dryer is covered or not freely accessible, this ■...
-
Page 37: Service
customer service customer service Customer service Service cedi enst If you cannot rectify the fault yourself (Faults, what to do?), please contact our Customer Service. We always find a suitable solution, also to prevent an unnecessary visit from the technician. You can find the contact details of the nearest Service Center here or in the list with... -
Page 38: Consumption Values
Consumption values Consumption values Consumption value table Consumption values Centrifuge with which it Program Energy consumption** Length of time** laundry centrifuged became 8 kg 4 kg 8 kg 4 kg Cotton 10 / 13 A 10 / 13 A 10 / 13 A 10 / 13 A 1400 rpm 136 min / 115 min... -
Page 39: The Most Efficient Program For Cotton Textiles
Consumption values The most efficient program for cotton textiles The next “standard cotton programme” (marked with you) is suitable for drying cotton with normal humidity and from the point of view of combined energy consumption the most efficient for drying wet cotton. Standard programs for cotton according to the current EU directive 932/2012 Load Program... -
Page 40: J Technical Data
Technical data Technical data Dimensions: Tcehnical data 85 x 60 x 60 cm height x width x depth Weight: approx. 45 kg Maximum load: 8 kg Condensate tank: 4.6 l Connection voltage: 220 - 240 V Connected load: max. 2800/2100 W Fuse: 13A / 10A Drum lighting*... - Page 44 Request for repair and advice in the event of malfunctions 088 424 4020 070 222 142 contact details in all countries can be found in the enclosed list with Service addresses. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 Munich GERMANY siemens-home.bsh-group.com * 9001471040* 9001471040 ( 9907)