Table of Contents
Advertisement
Modem settings
You can connect the phone using an IR or a data cable (CA-42) connection to a
compatible PC, and use the phone as a modem to enable packet data connectivity
from the PC.
To define the settings for connections from the PC, select
Connectivity
>
Packet data
the access point you want to use, and select
for access
point, and enter a nick name for the currently selected access point.
Select
Packet data access
establish a connection to an EGPRS network.
You can also set the dial-up service settings (access point name) on your PC using
the Nokia Modem Options software. See
settings both on the PC and on your phone, the PC settings are used.
■ Call
Select
Menu
>
Settings
Automatic volume control
volume according to the background noise
Call divert
(network service) — to divert your incoming calls. You may not be able
to divert your call, if some call barring functions are active. See
in
"Security,"
p. 83.
Anykey answer
>
On
— to answer an incoming call, briefly press any key, except
the end key and the left and right selection keys.
Copyright © 2006 Nokia. All rights reserved.
>
Packet data settings
Edit active access
point, and enter the access point name (APN) to
"PC Suite,"
>
Call
and from the following options:
— to set the phone to automatically adjust the speaker
Menu
>
Settings
>
Active access
point, activate
point. Select
p. 132. If you have set the
Call barring service
>
Alias
79
Advertisement
Table of Contents
