Nokia 616 User Manual page 25

Note
If these codes are not supplied with your car SIM card,
please contact your service provider.
First use
When you switch on the ignition after installation of the car kit
or after selecting Restore factory
automatically switches on.
Set the display language and usage mode
If you have not assigned a usage mode to the active user profile,
you are prompted to select the desired display language to be
used in the car kit for the active user profile.
When Usage mode is displayed, select
Enter the PIN code
When you are prompted to enter a PIN code, enter the PIN code
of the car SIM card. It appears on the display as ****. Press
to confirm.
Note
If SIM rejected appears on the display although a SIM
card is properly inserted into the radio unit and assigned
to the active user profile, contact your network operator
or service provider.
settings?, the car kit
Car SIM card.
Download contact entries from the car SIM card
The car kit asks if you wish to copy the contact entries stored on
the car SIM card to the car kit memory of the active user profile
if no contact entries are stored in the car kit memory.
Note
The car kit utilizes the contact entries in the internal car
kit memory and not those on the car SIM card in use. For
this reason, the entries on the car SIM card should be
copied into the car kit memory.
Ready for operation
The car kit logs into the GSM radio network using the car SIM
card and is operable in car SIM mode.
Operation in car SIM mode
25