Before Using For The First Time; Switching On For The First Time - Miele CVA 7440 Installation And Operating Instructions Manual

Before using for the first time

Before using for the first time
 Connect the coffee machine to the
electricity supply.
 Install the coffee machine by building
it in.
 Remove any notices from the
machine.
 Remove the protective foil from the
drip tray cover.
 Clean the water container, the bean
containers and the central spout.
 Remove the water container and fill it
with fresh, cold tap water. Only fill the
water container up to the "max."
mark and then refit it in the machine
(see "Filling the water container").
 Remove the bean containers and fill
them with roasted coffee beans.

Switching on for the first time

 Touch the On/Off button .
Selecting the display language
 Select the desired display language.
You might also be asked for your
location.
The choice of location determines how
the time of day is displayed, e.g. in the
12 or 24-hour format, as well as how
units are displayed and so on.
Setting up the network (Miele@home)
You can connect your coffee machine
to your home WiFi network.
The following appears in the display
during set-up:
Set up "Miele@home"
22
Tip: You can also choose to set up
Miele@home for your coffee machine at
a later point. In this case, select
 Make sure that your WiFi network
signal is sufficiently strong in the
place where you want to set up your
coffee machine.
 Touch
Continue
 Select the connection method you
wish to use.
 Follow the instructions provided in
the coffee machine display and in the
Miele app.
Connection successfully established.
appear in the display.
 Touch
Continue
set-up.
Setting the date
 Set the current date and touch OK.
Setting the time of day
 Set the current time of day and
touch OK.
If the coffee machine has been
connected to a WiFi network and is
signed into the Miele app, the time will
be synchronised based on the location
setting in the Miele app.
Setting the water hardness level
Contact your local water supplier to
find out your local water hardness
range if necessary.
More information can be found under
"Settings – Water hardness".
 Enter your local water hardness (in
°dH) and confirm with OK.
Skip
.
to proceed with the
.
will