Compliance Information - Sony PlayStation VR2 Instruction Manual

Compliance information

The PlayStation VR2 Sense controllers have been tested and found to
comply with the limits set out in the EU RE Directive and UK RE Regulation.
Only use cables that are either a) supplied with the equipment, b) official
PlayStation accessories or c) less than 3 metres in length.
This product has been manufactured by or on behalf of Sony Interactive
Entertainment Inc., 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan.
Imported into the United Kingdom and distributed by Sony Interactive
Entertainment Europe Limited, 10 Great Marlborough Street, London,
W1F 7LP, United Kingdom.
Inquiries related to product compliance in the UK should be sent to the
manufacturer's authorised representative, Sony Europe B.V., The Heights,
Brooklands, Weybridge, Surrey KT13 0XW, United Kingdom.
Imported into Europe and distributed by (except the UK) Sony Interactive
Entertainment Ireland Limited, 2nd Floor, 2/3 Rogers Lane, Dublin 2, Ireland.
Inquiries related to product compliance in the EU should be sent to the
manufacturer's authorised representative, Sony Belgium, bijkantoor van
Sony Europe B.V., Da Vincilaan 7-D1, 1930 Zaventem, Belgium.
RE Directive "Informal DoC" statement
Hereby, Sony Interactive Entertainment Inc., declares that the PlayStation
VR2 Sense controllers are in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU. For details, please
access the following URL: https://compliance.sony.eu
UK RE Regulation "Informal DoC" statement
Hereby, Sony Interactive Entertainment Inc., declares that the PlayStation
VR2 Sense controllers are in compliance with the relevant statutory
requirements. For details, please access the following URL:
https://compliance.sony.co.uk
The frequencies used by the wireless networking feature of this product are
the 2.4 GHz (Bluetooth®) range.
Wireless frequency band and maximum output power:
– Bluetooth® 2.4 GHz: less than 10 mW.
EN
21