Keypad Lock (Keyguard) - Nokia N92 User Manual

Shown if Ringing type
alert tone, IM alert
to Off.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network service).
All calls to the device are forwarded to another
number. If you have two phone lines (network service), the
indicator for the first line is
.
A compatible headset is connected to the device.
A loopset is connected to the device.
A data call is active.
A GPRS or EDGE packet data connection is available.
A GPRS or EDGE packet data connection is active.
A GPRS or EDGE packet data connection is on hold.
A UMTS packet data connection is available.
A UMTS packet data connection is active.
A UMTS packet data connection is on hold.
You have set the device to scan for wireless LANs, and
a wireless LAN is available. See 'Wireless LAN', p. 111.
14 Copyright © 2006 Nokia. All rights reserved.
is set to Silent and Message
tone, and E-mail alert tone
and for the second
A wireless LAN connection is active in a network that
are set has encryption.
A wireless LAN connection is active in a network that
does not have encryption.
Bluetooth connectivity is on.
Data is being transmitted using Bluetooth
connectivity.
A USB connection is active.
An infrared connection is active. If the indicator is
blinking, the device is trying to connect to the other device
or the connection has been lost.

Keypad lock (keyguard)

Use the keypad lock to prevent the keys from being
accidentally pressed.
To turn on the display light when the keypad lock is on,
press the power key.
• To lock: In the standby mode, press
When the keys are locked,
display.
• To unlock in the Fold open or View mode: Press
then .
When the keypad lock is on, calls may be possible to the
official emergency number programmed into your device.
, then .
is shown on the
,