Front Panel Block - Sony XAV-AX5600 Service Manual

XAV-AX5600
3-3.

FRONT PANEL BLOCK

soft cloth, etc.
Note 1: When working with the front side
facing down, lay a soft cloth, etc.
so as not to damage.
Note 4: When installing the USB connector of cable
for automobile (USB1), insert it firmly.
OK
Locked.
qa front panel block
Note 5: When installing the flexible flat cable
(60 core) to the connector (CN201)
on the MAIN board, insert straight to
the connector and lock a connector
completely.
No slanting after insertion.
OK
flexible flat cable
(60 core)
connector (CN201)
NG
Unlock.
flexible flat cable
(60 core)
connector (CN201)
NG
Slant.
flexible flat cable
(60 core)
connector (CN201)
23
rear side
top side
hole
front side
Return to
the normal
position.
NG
Unlock.
4 Remove the cable for automobile
(USB1) from the USB connector
(CN1701). (See Note 4)
A
terminal side
• BT antenna cable setting
< Fig. B >
Lead the BT antenna cable along
the white line on the MAIN board.
MAIN board
front side
DISPLAY board
hole
boss
1 screw
(PTT2.6
8 two screws
(PTT2.6 8)
5 Unlock.
A
9 claw
USB connector
0
(CN1701)
B
connector
(J600)
– Inner view –
Sony CONFIDENTIAL
For Authorized Servicer
Note 3: The front panel block can be removed
without removing the plate back block.
In such cases, skip steps 1 and 3, and
continue with the procedure.
3 plate back block
Note 2: When installing the plate back block,
align the two bosses and two holes.
1 screw
boss
2 screw
(B2
2 screw
(B2 6)
4)
connector
(CN201)
9 claw
B
connector
(J600)
7 Remove the connector
(J600) of BT antenna cable
from the MAIN board.
(See Fig. B)
6 Remove the flexible flat cable
(60 core) from the connector
(CN201). (See Note 5)
When installing the connector of
BT antenna cable, insert vertically,
and push it from the top.
OK
Vertical.
BT antenna cable
connector
(J600)
NG
Slant.
BT antenna cable
connector
(J600)
BT antenna
(PTT2.6 4)
6)
8 two screws
(PTT2.6 8)
SYS SET