Page 4
Licenses 4.8.3 Certificates 4.8.4 Logging 4.8.5 Diagnostics 4.8.6 System Overview Recommended Use of Your Camera Troubleshooting Completing a hardware reset Status codes AUX Commands Support services and Bosch Academy 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Installation Manual) Media Converter Direct fiber connection Full-sized SD card. Recommended: industrial SD cards from Western Digital (sold separately by Bosch) * Refer to the chapter Preparing Wiring in the Installation Manual. System requirements – Computer with Intel Xeon processor or better –...
Assuming the accumulated requested bitrate does not exceed the available network interface bandwidth, a minimum of five unicast connections is possible. IP Helper The IP Helper tool is a free PC application that makes it easy to detect Bosch cameras and devices on your network. Note: If you cannot connect, the unit may have reached its maximum number of connections.
Page 7
Fill in the fields User name and Password. Click OK. If the password is correct, the desired page appears. Note: New releases of software may require you to set a new and stronger password. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Dashboard Click this icon to see detailed system information. Links Click this icon to navigate to the Bosch download store. Logout Click this icon to log out of the device. Click this icon to get context-sensitive help for the page you are browsing.
The Dashboard is only visible in the application bar if the Show 'Dashboard' option is enabled by a service-level user in the Configuration -> Web Interface -> Appearance page. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Set pre-position, AUX on, or AUX off). A valid combination either issues a command to the device or displays an on-screen menu. Show pre-position Click this button to display a pre-position. Set pre-position Click this button to set a pre-position. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Page 11
The icon lights up and displays a moving graphic to indicate a running recording. If no recording is taking place, a static icon is displayed. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Page 12
Indicates that an alarm has occurred. Communication error A communication error, such as a connection failure to the storage medium, a protocol violation or a timeout, is indicated by this icon. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Click a result to play it back. Click Back to define a new search. 3.2.3 Exporting recorded video Select a track from the Track list or from the Search results. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
You can also download a .JSON file with information about the device: Click the Export button at the bottom of the page Select a location in your hard drive to store the file 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
A check mark in this check box indicates that at least one certificate is loaded onto the camera. If no certificates are loaded, then “No certificate installed” appears to the right of the text. The Escrypt certificate is a root certificate for Bosch Security Systems that proves that the device meets the following criteria: –...
The unit already contains the data for DST switch-overs for many years in advance. If the date, time and zone have been set up correctly, a DST table is automatically created. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
When video content analysis (VCA) is activated, additional information is displayed in the live video stream. With the MOTION+ analysis type, for example, the sensor fields in which motion is recorded are marked with yellow rectangles. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Page 18
Unbuffered: Displays video as it is received by the decoder with minimum latency. Allows the video to jerk if there is network jitter. Video buffer The value shown is calculated from the Latency mode setting. It cannot be changed. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Camera > Pre-positions and Tours of the Configuration page. Only the first six pre-positions are listed in the drop-down. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
This field identifies any cloud-based services with which the camera communicates. – If you have registered the device on a cloud-based service such as Bosch Remote Portal, then this field identifies this fact (“Connected”). Note: The button (Visit Remote Portal) to connect to the device with that service is active.
To transfer the IP address of the device, click the Register button. Status The status of the DynDNS function is displayed here for information purposes; these settings cannot be changed. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
– 60Hz: 30 or 60 fps – AUTODOME 7100i IR 8MP model: 25 or 30 fps Camera LED Select the Enabled or Disabled radio buttons to switch the Camera LED on or off. Select Auto disable to let the device determine when the LED should be switched off.
Page 23
Select the position of the camera name overlay in the drop-down box. It can be displayed at the Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to Off for no overlay information. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Page 24
In the field Position (XY), specify the exact position. (The default is 10.) In the field (0...255), enter the position range. (The default is 176). Select Off to hide the region from view. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Page 25
The focal length is provided, if the camera has a built-in lens. Select the appropriate mounting position of the camera. Options that appear depend on the type of camera. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Page 26
As an alternative, select the Calculate check box to obtain values based on the calibration elements that are marked on the image. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Page 27
‑ each with a vertical line ‑ and setting their size. 1,80 m (71 in.) for all is sufficient. Use at least one person in the front and one person in the background of the image for best results. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
– Sensitivity boost This mode provides maximum sensitivity in low light scenes by using longer exposure times, resulting in bright images even in extreme low light. – Fast movement 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Page 29
This feature is not supported by 1080p resolution devices. Saturation Select the percentage of light or color in the video image. Color hue Select the degree of color in the video image. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Page 30
※ Backlight compensation does not work in Fixed shutter mode. High sensitivity Adjusts the level of intensity or lux within the image. Select from Off or On. This feature is only available for the AUTODOME 7100i IR 8MP model. 2022-12 | V01 | DOC Bosch Security Systems B.V.
Page 31
This function lets you adjust the image contrast in the original scene, to make it lighter or darker. Contrast lets you get more detail in a dark area, or get video with more contrast. Bosch Security Systems B.V. 2022-12 | V01 | DOC...
Stream 1 always runs at maximum selected resolution in stream limits. On stream 2 and 3, you can select various downscaled resolutions. Non-recording profile Select the required profile for the non-recording mode for each stream. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
If you activate the recording function, the active profile switches from Non-recording profile to Active profile. The Active profile follows the scheduled profiles under Recording Profiles. This behavior is only applicable when using Bosch recording solutions, including edge recording or VRM recording. Third-party recording solutions might use the Non-recording profile.
11. To hide an individual mask, select the mask number and clear the Enabled check box. 12. To hide all masks from an image view, click the Disable Masks check box. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Manual: camera must be manually adjusted to compensate for varying light conditions. Auto iris level Increases or decreases brightness according to the amount of light. Type a value between 1 and 15. Available only with Constant Iris mode. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Tracking idel time [s] stops tracking, or if Intelligent Tracking loses visibility of an object being tracked. This allows the camera to re-acquire the target in a new, wider FoV. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Page 37
Determine the North compass heading, then move the camera to that position. Click the Set button next to “North point” to set the calibration point. Click the On radio button for the Compass parameter. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Click a pre-position number in the list Pre-positions. – Use the keypad and the button Show pre-position in AUX Control. To define a Custom tour: – Create the individual pre-positions. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
One push: activates Autofocus after the device stops moving. Once focused, Autofocus becomes inactive until the device is moved again. – Autofocus: Autofocus is always active. – Manual: Autofocus is inactive. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Enter a number between 0000 and 9999, inclusive, to identify the camera. 4.4.12 Illuminator Note: This menu page is valid for AUTODOME 7100i IR models only. IR mode Select the appropriate IR mode to control the IR illuminators: –...
With WiFi models the recording performance depends on the wireless transmission efficiency. To avoid degradation for continuous recording with an iSCSI target storage device, it is essential to use the Bosch Video Recording Manager or a DIVAR IP 2000 / DIVAR IP 3000 to manage all recordings without interruption.
It is also possible to let the VRM Video Recording Manager control all recordings when accessing an iSCSI system. This is an external program for configuring recording tasks for video servers. For further information please contact your local customer service at Bosch Security Systems.
Select the encoder profile setting that is to be used with stream 1 and 2 when recording. This selection is independent of the selection for live stream transmission. (The properties of the encoder profiles are defined on the Encoder Profile page.) Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Page 44
Alarm recording Select a period for the Pre-alarm time from the list box. Select a period for the Post-alarm time from the list box. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Select the desired date from the calendar. You can select several consecutive calendar days by holding down the mouse button. These will later be displayed as a single entry in the table. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
The bit rate of the recorded video (blue) and other data (grey), such as audio and metadata, are shown in the graphic. Line Identifies the current recording video. Recording Identifies the current recording profile (1 or 2). 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
4.5.8 SD Card Status It is recommended to use an industrial SD card with health monitoring and enhanced performance. For non-industrial SD cards, the lifespan options are not available. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Set the user password of all the remote stations to be accessed using this password. Setting destination 10 to the IP-address 0.0.0.0 overrides its function as the tenth address to try. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
VCA. This section is not a complete tutorial of setting up VCA. For more information, refer to the separate manual Video Content Analysis (VCA) , available on the Bosch Security Systems B.V. 2022-12 | V01 | DOC...
Select On if you want the device to generate audio alarms. Name Do not use any special characters, for example &, in the name. Special characters are not supported by the system's internal management. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Select the appropriate image size: – 512 x 288 – 640 x 480 – 704 x 480 – 704 x 576 – 768 x 432 – 1280 x 720 – 1536 x 864 Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Note: This name appears in the Digital I/O section of the Live page. Action Select a type of action to be performed when an alarm input occurs: – None 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Next, specify up to two (2) rule outputs, or the device's response to the input. Outputs include a physical alarm output, an AUX command, or a preposition scene. Select the required Input (a physical alarm connection) from the dropdown list: Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Enter the desired IP address for the camera in this field. The IP address must be valid for the network. A typical IPv6 address may resemble the following example: 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Page 55
You can activate and configure encryption of the media data (video and metadata) on the Encryption page (see Encryption). Minimum TLS version Select the version for minimum Transport Layer Security (TLS). Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
This field shows any certificates that are already uploaded at the client level or at the server level. Click Configure to be redirected to the Certificates page in order to add or configure any existing certificates. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
(Multi-unicast), or it is sent as a single stream to the network, where it is simultaneously distributed to multiple receivers in a defined group (Multicast). Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
IP Address 1 / 2 Enter the IPv4 address that you want to allow or block Mask 1 / 2 Enter the subnet mask for the appropriate IPv4 address. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Notice! Potential loss of data Bosch recommends that you save all device configurations, including IVA and calibration, on your network before starting a firmware update. Bosch Security Systems B.V.
Delete a certificate from the file list Click the trashcan icon to the right of the certificate. The Delete file window appears. To confirm deletion, click OK. To cancel deletion, click Cancel. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Click Open source licenses to open a browser page with information on the open source software in use. Click Other open source licenses to open a browser page with general open source software license information. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
If you must remove the bubble (for example, to install or remove an SD card), do not leave the bubble off of the dome for longer than five minutes. Bosch also recommends that you keep the dome camera in its packaging until you are ready to install the camera.
Page 63
SD cards for recording. Bosch is not liable for any damage that results from missing video information. Bosch does not make any commitments or promises regarding quality, performance, or other features with respect to third-party products (such as SD cards).
If there is no STREAM1 or STREAM2 display check to see if there is a M- JPEG display. If there is M-JPEG but not a STREAM1 or STREAM2 display in H.264 or H.265 then the problem might be with the BOSCH VideoSDK software version.
Page 65
(set to AUTO, with appropriate day/night threshold, or forced into monochrome in picture settings) – If the Illuminators are On, then check to see if the BOSCH temperature specification has been exceeded. If so, it will automatically turn the illuminators Off for product protection.
Page 66
Trying pressing the Factory Default button. If Fiber optic output is used with NDA-7100-PIPEF or NDA-7100-PENF: – Check that a BOSCH 100Mbps SFP module is not being used since it is not supported. – Check that the SFP module supports 1.25Gbps.
Test your camera with another power supply. intermittently. – Check the Bosch website for a software update that might address the issue. Completing a hardware reset You may need to complete a hardware reset if you have the following issues: –...
Page 68
| Troubleshooting AUTODOME 7100i Access the camera using the web browser. Set the initial service-level password for the camera. 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
– Refer to the “Troubleshooting” section of the midspan installation manual. Note: Bosch does not recommend or test any third-party High PoE sources. If you use a non-Bosch PoE device, then contact the manufacturer of that device for assistance.
Page 70
2. Verify the integrity/tightness of the external fasteners. Tighten where necessary. 3. If obvious damage is present, stop using the camera and contact the nearest Bosch Security Systems Service Center. 4. If no damage is evident, power the camera off and then on, and then evaluate operational performance.
Page 71
3. If damage to the seals is obvious, contact the nearest Bosch Security Systems Service Center. 4. Make sure the camera reaches an ambient high air temperature on first use, to allow the breather vent to remove possible initial humidity.
Page 72
2. Verify that the camera’s earth ground connection is attached per earlier instructions. If these actions do not resolve this problem, contact the nearest Bosch Security Systems Service Center. When operating using redundant 1. Verify the operating status of the external power sources, the camera has 36 VDC power source.
Page 73
If you choose not to use a switch or midspan with the appropriate Power Sourcing Equipment (PSE) chip, then the camera will not recognize the PoE as compliant, and the camera firmware may disable some or all functionality. Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Recalibrate Azimuth Compass On/Off Azimuth/Elevation Display On/Off Compass Points Display On/Off Record Tour A On/Off Record Tour B On/Off Turbo Mode On/Off Power Mode On/Off Proportional speed control adjustment Aux 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Page 75
AUTODOME 7100i AUX Commands | en Function Description On/Off Mask Calibration Procedure 1-256 Set/Show Pre-position Programming/Pre-position Recall Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
– Repair & Exchange – Product Security Bosch Building Technologies Academy Visit the Bosch Building Technologies Academy website and have access to training courses, video tutorials and documents: www.boschsecurity.com/xc/en/support/training/ 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...
Page 77
AUTODOME 7100i Support services and Bosch Academy | Bosch Security Systems B.V. 2022-12 | V01 | DOC User Manual...
Page 78
| Support services and Bosch Academy AUTODOME 7100i 2022-12 | V01 | DOC Bosch Security Systems B.V. User Manual...