Adjusting Screen Quality; Optimizing Digital Conversion - HP f1523 User Manual

Operating the Monitor
Advanced OSD Menu Levels (Continued)
Level 1
Factory Reset
Exit

Adjusting Screen Quality

Allow the monitor to warm up for 20 minutes before performing
the following procedures.
The Auto-adjustment feature automatically fine-tunes the image
quality each time a new video mode is displayed. If additional
image quality improvement is desired, run the Auto-Adjust
software on the CD and press the – (Minus) button on the monitor
front panel to manually activate the Auto-Adjustment function.
For more precise adjustments, run the Auto-Adjust software on
the CD, and use the Clock and Phase controls of the monitor to
fine-tune the image.

Optimizing Digital Conversion

This monitor contains advanced circuitry that allows the flat
panel screen to function like a standard monitor. Two controls in
the on-screen display can be adjusted to improve image
performance: Clock and Clock Phase. Use these controls only
when the auto-adjust function does not provide a satisfactory
image.
✎
The Clock must first be set correctly since the Clock Phase
settings are dependent on the main Clock setting.
4–8
Level 2
Cancel
Save and Return
Yes
No
Level 3 Factory
Reset
User's Guide