Siemens SIMATIC S7-1500 Manual page 10

Properties
The module has the following technical properties:
● 8 analog inputs
● Voltage or current measuring type can be set per channel
● Resolution 16 bits including sign
● Configurable diagnostics (per channel)
● Hardware interrupt on limit violation can be set per channel (two low and two high limits
● High-speed update of measured values
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Isochronous mode
Calibration in runtime
Module-internal Shared Input (MSI)
Configurable submodules / submodules for
Shared Device
Configurable after interface module
IM 155-5 DP ST
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Analog Input Module AI 8xU/I HS (6ES7531-7NF10-0AB0)
Manual, 07/2014, A5E03484886-AC
per channel)
Firmware version
of the module
(TIA Portal)
V1.0.0 or higher V12 or higher
V1.0.0 or higher V12 or higher
V1.0.0 or higher V12 or higher
V1.0.0 or higher V12 or higher
V1.0.0 or higher V12 or higher
V2.0.0 or higher V13 Update 3 or
(PROFINET IO
V2.0.0 or higher V13 Update 3 or
(PROFINET IO
V2.0.0 or higher V13 or higher
Configuration software
STEP 7 GSD file in STEP 7
(TIA Portal) V12 or higher, or
STEP 7 V5.5 SP3 or higher
higher
(PROFINET IO only)
only)
higher
(PROFINET IO only)
only)
Product overview
2.1 Properties
X
X
X
---
X
X
X
X
9