■ Set motor parameters
Table 3-3. Motor parameters
Title
Function Name
F400
Offline auto-tuning
F401
Slip frequency gain
Motor rated capacity
F405
(motor name plate)
Motor rated current
F415
(motor name plate)
Motor rated speed
F417
(motor name plate)
F402
Automatic torque boost
F416
Motor no load current
F412
Leakage inductance
The motor parameters require setting according to the motor used. For details, refer to the inverter instruction manual.
Parameter Setting
0: -
1: Reset motor parameters (0 after execution)
2: Auto-tuning at run command (0 after execution)
3: Auto-tuning at TB ON
4: Motor parameters auto calculation (0 after execution)
5: 4+2 (0 after execution)
6: Auto-tuning at run command during TB is ON
7: Auto-tuning F402 only at run command during TB is
ON
0 – 250%
0.10 – 315.0kW
Depend on capacity
-1
100 – 64000min
0.01 – 30.00%
10 – 90%
0.0 – 25.0%
14
E6582171
Default Setting
0
70
Depends
on type.