Siemens SIREMOBIL Compact Quick Start Manual page 4

4
For Memoskop C-E (without keyboard)
•
Switch on the system.
•
On Memoskop C-E, the keyboard connector includes an adapter.
•
Connect the Service PC to the adapter on Memoskop C-E and start Windows.
•
Call up the "terminal.exe" program.
•
Set the following in the "terminal.exe" program:
•
Adjust to the interface being used (COM1 / COM2).
•
The keyboard is now emulated with the service PC.
NOTICE
•
Simultaneously press the [CTRL] and [U] keys on the service PC.
•
Call up the "B output for video recorder" submenu.
•
Perform the configuration for monitor A.
(Perform the configuration for monitor B only by special customer request.)
•
End the User menu.
•
Switch the SIREMOBIL Compact off and on again to activate the new configuration.
Function check
•
Set the video recorder to exposure.
•
WIth Fluoro, move the collimator blades slightly into the field.
Release fluoro for approximately 20 seconds.
•
Stop the video recorder and rewind the tape.
•
Connect a 50 Hz / 60 Hz monitor to the video output of the video recorder and replay the
scene.
Concluding work
•
Switch OFF the SIREMOBIL .
•
Test the protective conductor with the protective conductor meter 44 15 899 RV 090 .
Refer also to TI 236 / ARTD - 002.731.17...
TD SP 2 / Arnold
SIREMOBIL Compact
Installing and setting the Video Recorder
9600 Baud
The service PC keyboard does not include the >|< (Home) key.
Instead, in the main User Setup menu enter the letter "O". Enter
the next unused number in the sub-menu of the User Setup.
Example: The last sub-menu is called up by entering the number
12. -> The >|< (Home) key would be emulated by entering the num-
ber 13.
This calls the User Setup menu for Memoskop.
Register 3
8 Bit Parity none
TD SP 1 / Schlee
RXR2-130.033.04
Rev. 01 08.96
1 Stopbit
SMS Iselin / O'Donnell
Page 4 of 4
TD SP 1 Medical Engineering
1
1
1
Siemens AG