Limitation of Warranty Exclusive Remedies Product maintenance agreements and other customer Assistance assistance agreements are available for Hewlett-Packard products. For any assistance, contact your nearest Hewlett-Packard Sales and Service Oce.
Safety Notes Caution Warning denotes a hazard. It calls attention to a Warning procedure which, if not correctly performed or adhered to, could result in injury or loss of life. Do not proceed beyond a warning note until the indicated conditions are fully understood and met.
General Safety Considerations This is a Safety Class I product (provided with a Warning protective earthing ground incorporated in the power cord). The mains plug shall only be inserted in a socket outlet provided with a protective earth contact. Any interruption of the protective conductor, inside or outside the instrument, is likely to make the instrument dangerous.
Available ac Voltage Voltage Range Fuse Type 100 V 90 to 110 V rms 2.00 A F (HP p.n. 2110-0002) 120 V 108 to 132 V rms 2.00 A F (HP p.n. 2110-0002) 220 V 198 to 242 V rms 1.00 A F (HP p.n.
Page 21
Figure 2-2. Voltage Selector Installation...
Page 22
Stack and Connect the System Note Installation...
Page 23
Figure 2-3. System Connections Installation...
Operation Verification Model Front Panel Go To HP 8509A Page 3-2 HP 8509B Page 3-8 with internal source HP 8509B/ Page 3-12 (Option 210, 220) without internal source Operation Verification...
Page 26
Operation Verification for HP 8509A Required Equipment Table 3-1. Recommended Patchcords Connector Type Connector Option Number Patchcord HP Part Number HMS-10HP 08703-80003 FC/PC 1005-0136 DIN 47256 1005-0144 1005-0135 Biconic 1005-0134 Operation Verification...
Preliminary Steps NNNNNNNNNNNNNNNNNNNN System NNNNNNNNNNNNNN Zero Note Underrange Connector Care User's/Reference Guide Figure 3-1. HP 8509A Equipment Setup Operation Verification...
Page 28
Adjust the Laser Fiber For Maximum Power Figure 3-2. HP 8509 Basic Measurement Screen Operation Verification...
Page 32
Operation Verification for HP 8509B (With Internal Optical Source) Note Required Equipment Table 3-2. Recommended Patchcords Connector Type Connector Option Number Patchcord HP Part Number HMS-10HP 08703-80003 FC/PC 1005-0136 DIN 47256 1005-0144 1005-0135 Biconic 1005-0134 Operation Verification...
Page 33
Preliminary Steps Connector Care User's/Reference Guide NNNNNNNNNNNNNNNNNNNN System NNNNNNNNNNNNNN Zero zero Note zero Figure 3-5. Equipment Setup Operation Verification...
Page 36
Operation Verification for HP 8509B (Without Internal Source) Required Equipment Table 3-3. Recommended Patchcords Connector Type Connector Option Number Patchcord HP Part Number HMS-10HP 08703-80003 FC/PC 1005-0136 DIN 47256 1005-0144 1005-0135 Biconic 1005-0134 3-12 Operation Verification...
Page 37
Preliminary Steps User's/Reference Guide NNNNNNNNNNNNNNNNNNNN System NNNNNNNNNNNNNN Zero zero Figure 3-7. Equipment Setup Operation Verification 3-13...
If Things Go Wrong Problems requiring additional resources If Things Go Wrong...
Page 44
The system appears to be dead If Things Go Wrong...
Page 45
If the computer does not respond If Things Go Wrong...
Page 46
If you get the \EEprom not formatted or Box on?" error message If Things Go Wrong...
Page 47
If operation verification fails DOP measurement is out of specification HP 8509A/B User's/Reference Guide HP 8509 User's/Reference Guide If Things Go Wrong...
Page 48
underrange Power display reads underrange If Things Go Wrong...
Page 49
To return for service Caution If Things Go Wrong...
Page 50
Table 4-1. Hewlett-Packard Sales and Service Offices US FIELD OPERATIONS Headquarters California, Northern California, Southern Colorado Georgia Illinois New Jersey Texas If Things Go Wrong...
Page 51
Table 4-1. Hewlett-Packard Sales and Service Offices (continued) EUROPEAN FIELD OPERATIONS Headquarters France Germany Great Britain INTERCON FIELD OPERATIONS Headquarters Australia Canada China Japan Singapore Taiwan If Things Go Wrong...