2-5.
MAIN BOARD
6 MAIN board
Note 2: When installing the MAIN board,
match the position of switch and
knob (power).
switch
knob (power)
Note 3: When replacing MAIN board, refer to "ABOUT THE
FIRMWARE REWRITING WHEN REPLACING
THE MAIN BOARD" on page 3.
4 Remove the electret
cap microphone (R).
1 two screws
– Rear bottom view –
5 cushion (MIC)
5 cushion (MIC)
2
Note 1: Please spread a sheet under a unit
not to injure case (front).
ICD-LX30
3 Remove the electret
cap microphone (L).
7