GE AF-600 FP Design Manual page 80

4.2.9 Control Terminals
Drawing reference numbers:
1. 10 pole plug digital I/O.
2. 3 pole plug RS485 Bus.
3. 6 pole analog I/O.
4. USB Connection.
4.2.10 Control Cable Terminals
To mount the cable to the terminal:
1. Strip isolation of 9-10 mm
2. Insert a screw driver 1) in the square hole.
3. Insert the cable in the adjacent circular hole.
4. Remove the screw driver. The cable is now mounted to the terminal.
To remove the cable from the terminal:
1. 1)
Insert a screw driver in the square hole.
2. Pull out the cable.
1)
Max. 0.4 x 2.5 mm
Illustration 4.18: Control terminals (all enclosures)
1.
2.
AF-600 FP Design Guide
4
3.
79