Plug In And Turn On; Install Ink Cartridges - Epson Stylus Photo RX600 Start Here Manual

4
Unlock the Printer
1
Lift up the entire scanner unit
using the handles on the side.
2
Remove the clear plastic
sheet inside.
3
Remove the orange plastic print head lock and store it in the
storage area.
Caution: You must remove the orange print head lock or the
RX600 won't work.
4
Close the scanner unit.
5
Connect the short cable leading from
the scanner lid to the round TPU
connector on the back of the RX600.
Position the connector as shown here
before pushing it in. Don't force it in.
5

Plug In and Turn On

1
Plug the RX600 into a grounded
electrical outlet. Do not connect
the USB cable yet.
2
Press and hold the On button until
the Mode and Setup lights flash.
6

Install Ink Cartridges

1
Press the Color button on the front
of the RX600. The print head moves
into loading position.
2
Lift up the entire scanner unit.
continue