Epson Stylus Photo 1200 User Manual page 143

Your printer icon doesn't appear in the Chooser (Macintosh)
Possible cause
Your Macintosh has
extension conflicts.
The Chooser contains
too many items.
Your application program can't open your image file (Macintosh)
Possible cause
Not enough memory
is allocated to the
application.
The "SP 1200 cannot be used" message appears (Macintosh
Possible cause
The printer software
has been corrupted.
Your printer doesn't print correctly as a remote printer (Windows NT)
Possible cause
You may need to use
a different network
path and printer port.
#" $ 
Solution
®
Disable Quick Draw GX in the Extensions Manager. Make sure EPSON
Monitor3 and SP 1200 are enabled, and then restart your Macintosh.
Delete unused items or move them to the Extensions (Disabled) folder.
Then check for your printer icon in the Chooser again.
Solution
Highlight the program icon and select Get Info from the File menu, then
increase the memory allocated to the application.
Solutions
Remove and reinstall the printer software as described in the Printer
Basics book. Then, in the Extensions Manager, disable Quick Draw GX,
enable EPSON Monitor3 and SP 1200, and restart.
Solution
Select a different printer port in the printer's Properties window and enter
the new network path to your printer at the DOS prompt. Then restart
your computer. See your Windows NT documentation for instructions on
changing the printer port and network path.
)