Loading Paper Manually - Epson Stylus Pro 4000 Quick Reference Manual

Loading Paper Manually

Loading Paper Manually
The front manual feed slot provides a straight-through
paper path for fine art paper, posterboard, or other
media 19 to 55 mil (0.5 to 1.5 mm) thick. Make sure
there is enough space behind the printer for feeding
the paper.
Note: Use the top manual feed slot for very
glossy media (such as EPSON Pemium Glossy
Photo Paper).
1
Make sure the printer is turned on, then press
the Paper Source button until you see the
cut sheet icon.
2
Release the paper lever.
3
Open the top cover.
4
Insert the sheet face-up.
5
Push the sheet under the gray feed rollers,
and align the right edge with the vertical mark
on the right side of the tray cover.
6
Close the top cover.
7
Return the paper lever to the secured position.
The printer grabs the paper and feeds it into
printing position.
8
Extend the paper tray and cover to support the
sheet as it comes out of the printer. Make sure the
roll paper support is not raised.
3
Align paper with
OTHER mark