Aascii Codes And Character Fonts; Ascii Codes And International Characters - Epson FX-80 User Manual

ASCII Codes and Character Fonts
This appendix provides information about the way the ASCII
codes are employed on the FX printers and about the character fonts
associated with those codes. The first section summarizes the codes.
The second section displays, in ASCII order, the decimal number, the
hexadecimal number, a printout, and an enlarged dot matrix for each
character in the two fonts that you can access directly:
the Roman font for the USA character set (decimal
1.
the Italic font for the USA character set (decimal
2.
included here is the pair of fonts for the international characters,
which you access indirectly:
3. the Roman font for international characters (decimal 0-31)
the Italic font for international characters (decimal
4.

ASCII Codes and International Characters

To use a character or one of the control codes specified in the third
column, you use the BASIC character-string command, CHR$(n),
where n represents the decimal number shown in the first column. You
cause the code to be sent to a device by using another command; the
most common command for sending a code to the printer is LPRINT.
For more on this subject, see Chapter 2.
Appendix A
32-126)
X0-254) Also
128-159)
253