Setting Timer (Programming) - Hitachi PC-P2HTE Installation Manual

6.2. SETTING TIMER (PROGRAMMING)

1.Press TIMER switch. SET
and SCHEDULE are
indicated. Schedule Number
"1" flickers and other
numbers are indicated.
2.By pressing △schedule
switch, schedule Number
moves
[1] [2] [3] [4] [S] [1]
....
*In case of selecting [S],
ON/OFF time and shift
temperature can be set.
*By pressing TIMER switch,
SET and SCHEDULE are
lighted off and changed to
normal mode.
3.By pressing OK switch,
selected schedule Number is
indicated. Other schedule
number are lighted off, and
"Hour" of ON time for the
selected schedule Number
flickers.
4.Press SELECT △▽ switch
to adjust "hour", and when
adjusted press OK switch.
"Hour" is indicated and
"minutes" flickers.
6.3. DETERMINE APPLICABLE SCHEDULE
1.Press TIMER switch more
than 3 seconds and SET is
indicated. All days and
schedule Number are
indicated.
2.Press ▽ DAY switch until
the day to be set flickers.
By pressing it, the day
flickers
[Mon] [Tue] ... [Sun] [
Mon~Sun]
[Mon~Fri] [Sat,
Sun] [Mon].... In case of
flickering various days, the
same setting is applied to
the days.
3.Press △ SCHEDULE
switch until schedule
number to set flickers.
6.4. TIMER CANCELLATION
In normal mode, press
SELECT △switch
simultaneously more than 3
seconds. NEXT SCHEDULE
flickers. (All the timer
cancellation)
INSTALATION AND OPERATION MANUAL FOR PC-P2HTE
5.Press SELECT △▽ switch
to adjust "minutes", and
when adjusted, press OK
switch. "Minutes" is
indicated and "hour" of
OFF time flickers.
6.Set OFF time in the same
way as that of ON time.
After setting "minutes", OFF
time is indicated. In case of
selecting schedule number
[1][2][3][4], the indication is
changed to set the
schedule Number shown in
the 2. In case of selecting
[S], see the chapter of
setting shift temperature for
details.
7.By pressing TIMER switch,
SET and SCHEDULE are
lighted off and back to
normal mode.
4.Press switch, and
SCHEDULE is indicated,
and then schedule number
selected at item 3 is applied
to the days set in item 2 .
By pressing OK switch,
switch valid/invalid and
SCHEDULE lights ON/OFF
is appeared.
5.Press TIMER switch and
SET lights off, and back to
normal mode.
During the TIMER
cancellation mode, press
SELECT △switch
simultaneously more than 3
seconds. NEXT SCHEDULE
is indicated. (Timer
activation)
7