BrightLink 455Wi Quick Guide Guide rapide Installing the Software Installation du logiciel Using the Projector Utilisation du projecteur Solving Problems Résolution des problèmes Notices and Warranty Avis et garantie Keep this book with the pens and remote control at all times. Conservez ce guide avec les crayons et la télécommande en tout temps.
Introduction ™ Your BrightLink 455Wi projector turns any wall into an interactive whiteboard. After your projector has been installed, read this booklet to: ■ Install the software on your computer ■ Connect the cables to your computer ■ Use the remote control ■...
1. Install Easy Interactive Driver and TeamBoard Draw (see page 6). Use the CDs that came with the projector, or download from: epson.com/support/brightlinkdownloads (U.S.) epson.ca/support/brightlinkdownloads (Canada) 2. Make sure the batteries are installed in the interactive pens and remote control (see pages 8 and 9).
Page 5
All Programs TeamboardAnnotate Select Freehand or Rectangle to capture screen Use virtual keyboard Open whiteboard screen ® ) or in the Dock > Programs Epson Easy Interactive Calibrate (Normal) from the Calibrate > Programs icon on your screen. Open application...
This section explains how to install the software for the interactive pens and your on-screen manuals. Periodically, it’s a good idea to check Epson’s support website for free updates to your Easy Interactive software. Visit epson.com/support/brightlinkdownloads (U.S.) or epson.ca/support/brightlinkdownloads (Canada).
Page 7
3. Follow the on-screen instructions to register your projector and install the manuals. (Macintosh) and Launch Easy Interactive Driver Mac OS (Mac OS). Continue Continue icon. Epson Register to Startup . If you see a Run Setup.exe Installing the Software...
Note: You can also visit the following website to download the Easy Interactive Driver, manuals, and TeamBoard Draw: www.epson.com/support/brightlinkdownloads (U.S.) www.epson.ca/support/brightlinkdownloads (Canada) Installing the Pen Batteries Make sure the pen batteries are installed. To check the batteries, press the button.
1. Press in the tab on the battery cover as you lift the cover off. 2. Install two batteries, inserting the ends as shown. – 3. Replace the battery cover and press it down until it clicks into place. Installing the Remote Control Batteries Make sure the remote control batteries are installed.
2. Install two batteries, inserting the ends as shown. – 3. Replace the battery cover and press it down until it clicks into place. Connecting the Cables VGA computer cable USB cable You can connect the projector to any computer that has a standard monitor out port using the VGA computer cable that came with the projector.
Connecting the VGA Computer Cable 1. Locate the VGA computer cable connected to the projector. 2. Connect the other end of the cable to your computer’s monitor out port. Connecting the USB Cable for the Interactive Pens In order to use the interactive pens, you must connect the USB cable to the projector and your computer.
Turning the Projector On and Off Before you turn on the projector, turn on your computer. 1. Make sure the projector is plugged in. The Ppower light should be orange. Power light 2. Press the Ppower button on the remote control. Power button After a few moments, you should see your computer desktop displayed.
Adjusting the Image If necessary, you can use the remote control buttons to adjust the image: Select the image source to display Temporarily turn off image Adjust image position and quality Page through documents Zoom in and out Access menu system for additional adjustments Select from various image sources connected to the...
Performing Calibration Two types of calibration are available: ■ Normal, which is faster and appropriate for most situations (25 calibration points) ■ Advanced, which is recommended when you are projecting very detailed images and need higher accuracy (49 calibration points) You may need to recalibrate if you use a different computer, change your computer’s resolution, press the using the remote control.
Page 16
3. Wait until you see a flashing green circle in the upper left corner of your projected image. 4. Touch the center of the circle with the tip of the pen. The circle stops flashing and turns black. You see another circle on the right. 5.
Using the Interactive Pens The interactive pens included with your projector turn almost any wall into an interactive whiteboard. This chapter tells you how to use the pens and get started with TeamBoard Draw. Using the Pen as a Mouse The Easy Interactive Driver allows you to use the pen as a mouse.
Using TeamBoard Draw With TeamBoard Draw, you can use the pen to write or draw on the projection surface. Two modes are available: ■ Annotation mode, which lets you add notes and other information directly into whatever program is open ■...
Page 19
2. Select the camera icon to open the TeamBoard Drawing toolbar: 3. Select the TeamBoard Draw the full-screen “whiteboard” mode: For more information about using the TeamBoard Draw tools and saving your drawings and annotations, select the Help menu on the whiteboard screen. Using TeamBoard for Mac OS 1.
Page 20
If you select TeamboardAnnotate Select Freehand or Rectangle to capture screen Use virtual keyboard If you select Draw 2. Select the camera icon to open the TeamBoard Drawing toolbar: 3. Select the the full-screen “whiteboard” mode: For more information about using the TeamBoard Draw tools and saving your drawings and annotations, select the Help menu.
Using the Tablet PC and Ink Functions When you install the Easy Interactive Driver, the Tablet PC function is enabled in ® Windows 7 and Windows Vista . This allows you to annotate, use handwriting input, and perform other actions using the pen, even without installing annotation software.
Solving Problems If you have a problem with your projector, you can press the remote control to help solve it. You can also check the following section for basic troubleshooting suggestions, or see the on-screen User’s Guide for more detailed help. Note: If any of the lights on the projector turn red, this indicates a problem with the lamp, temperature, or other aspect of the projector.
Displays Show displays in menu bar Arrangement checkbox is selected. pen icon on your taskbar (Windows) or in the Dock > Start All Programs VGA Display Color LCD tab, then make Arrange > Programs EPSON Easy Interactive Problems and Solutions...
To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This is the fastest way of speaking to a live representative, and it’s free. This service is available 6 , Pacific Time, Monday through Friday, for the duration of your warranty period.
If your projector included RM Easiteach and you need help, call (866) 728-6758 or visit the following support website: www.rmeducation.com/easiteach For all other software issues, please contact Epson as described on page 24. Purchase Supplies and Accessories You can purchase lamps and accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Declaration of Conformity According to 47CFR, Part 2 and 15 for: Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: Epson America, Inc. Located at: MS 3-13 3840 Kilroy Airport Way...
Epson America, Inc. Limited Warranty Two-Year Projector Limited Warranty Epson America, Inc. Limited Warranty...
Page 28
To find the Epson Customer Care Center nearest you, please visit www.epson.com/support. To contact the Epson Connection , please call (800) 637-7661 + PIN or (562) 276-4394 in the U.S. and (905) 709-3839 in Canada or write to Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012. Notices...
(excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
Introduction Le projecteur BrightLink blanc interactif. Lorsque l’installation du projecteur est complétée, lisez ce livret pour : ■ Installer le logiciel sur votre ordinateur ■ Brancher les câbles à votre ordinateur ■ Utiliser la télécommande ■ Mettre le projecteur sous tension et régler l’image ■...
1. Installez le pilote Easy Interactive Driver et le logiciel TeamBoard Draw (voyez la page 36). Utilisez les CD fournis avec le projecteur ou téléchargez les fichiers à l’adresse epson.ca/support/brightlinkdownloads. 2. Assurez-vous que les piles sont installées dans les crayons interactifs et la télécommande (voyez les pages 38 et 40).
Page 35
Dock (Mac OS ou procédez comme suit : ■ Windows : Sélectionnez > Programmes Epson Projector ■ Mac OS : Ouvrez le dossier Applications, puis sélectionnez l’icône Interactive Driver 7. Calibrez votre système (voyez la page 46). ■...
Cette section explique comment installer le logiciel pour les crayons interactifs et les manuels à l’écran. Visitez régulièrement le site Web de soutien d’Epson pour voir s’il existe des mises à jour gratuites du logiciel Easy Interactive. Visitez le site Web : epson.ca/support/brightlinkdownloads.
Page 37
3. Suivez les instructions à l’écran pour enregistrer votre projecteur et installez les manuels. Démarrage automatique Mac OS (Windows) ou Continuer . Si vous voyez l’écran Contrôle de compte d’utilisateur, Epson S’enregistrer pour (Macintosh) et (Mac OS). Installation du logiciel...
Remarque : Vous pouvez aussi visiter le site Web suivant pour télécharger le pilote Easy Interactive Driver, les manuels et TeamBoard Draw : www.epson.ca/support/brightlinkdownloads Installation des piles du crayon Assurez-vous que les piles du crayon sont installées. Pour vérifier si les piles du crayon sont chargées, appuyez sur le bouton.
Page 39
1. Poussez la languette du couvercle du logement de piles, puis relevez celui-ci pour le retirer. 2. Placez deux piles en respectant les symboles de polarité , tel que montré. – 3. Fermez le couvercle du logement de piles et appuyez dessus pour l’enclencher. Installation des piles du crayon...
Installation des piles de la télécommande Assurez-vous que les piles de la télécommande sont installées. Si vous devez installer ou remplacer les piles, utilisez deux piles alcalines AA. 1. Appuyez sur la languette du couvercle du logement de piles, puis soulevez-le pour le retirer.
Branchement des câbles Câble d’ordinateur VGA Câble USB Vous pouvez connecter le projecteur à tout ordinateur disposant d’un port de sortie de moniteur standard en utilisant le câble d’ordinateur VGA fourni avec le projecteur. De plus, vous devez connecter le câble USB avant de pouvoir utiliser les crayons interactifs.
Connexion du câble USB pour les crayons interactifs Afin de pouvoir utiliser les crayons interactifs, vous devez connecter le câble USB à votre projecteur et votre ordinateur. 1. Situez le câble USB branché au projecteur. 2. Branchez l’extrémité plate du câble dans un port USB libre ordinateur portatif ou de bureau.
Page 43
2. Appuyez sur la touche d’alimentation P de la télécommande. Après quelques secondes, le bureau de votre ordinateur devrait être affiché. Si l’écran est vide ou que le message pour obtenir de l’aide. Avertissement : Ne regardez jamais dans l’objectif lorsque la lampe est allumée. Cela peut causer des lésions oculaires;...
Essayez de retirer et de reconnecter le câble USB. 2. Si vous ne voyez pas l’icône, procédez comme suit : Windows : Sélectionnez > Programmes Epson Projector Mac OS : Ouvrez le dossier et ensuite, sélectionnez l’icône Driver Si vous avez besoin d’aide supplémentaire, voyez la page 55.
Page 46
Exécution du calibrage Deux types de calibrage sont disponibles : ■ Normal, qui est plus rapide et qui convient le mieux pour la plupart des situations (25 points de calibrage) ■ Avancé, qui est conseillé lorsque vous projetez des images avec beaucoup de détails et quand il faut une précision supérieure (49 points de calibrage) Il est possible que vous deviez refaire le calibrage si vous utilisez un autre ordinateur, si vous modifiez la résolution de votre ordinateur, si vous appuyez sur...
Page 47
2. Après avoir lu le message sur le calibrage, cliquez sur 3. Patientez jusqu’à ce que vous voyiez un cercle vert clignotant dans le coin supérieur gauche de votre image projetée. 4. Touchez le centre du cercle avec la pointe du crayon. Le cercle cesse de clignoter et passe au noir.
Page 48
Après avoir terminé le calibrage, vous pouvez utiliser comme souris l’un ou l’autre des crayons sur le tableau ou le mur de projection. Avec des logiciels additionnels, vous pouvez aussi vous servir des crayons pour écrire ou dessiner sur l’image projetée.
Utilisation des crayons interactifs Les crayons interactifs fournis avec votre projecteur vous permettront de transformer pratiquement tout mur en tableau blanc interactif. Ce chapitre vous indique comment utiliser les crayons et TeamBoard Draw. Utilisation du crayon comme souris Le pilote Easy Interactive Driver vous permet d’utiliser le crayon comme souris. Si vous avez installé...
Utilisation de TeamBoard Draw Avec TeamBoard Draw, vous pouvez utiliser le crayon pour écrire ou dessiner sur la surface de projection. Il y a deux modes disponibles : ■ Le mode annotation : permet d’ajouter des notes et d’autres informations directement dans le programme ouvert ■...
Page 51
2. Sélectionnez l’icône d’appareil photo TeamBoard Draw : 3. Sélectionnez l’icône ouvrir le mode de dessin sur « tableau blanc » sur plein écran : Pour obtenir plus d’information concernant l’utilisation des outils de TeamBoard Draw et la sauvegarde de vos dessins et annotations, sélectionnez le menu Aide à partir du menu du tableau blanc.
Page 52
Si vous sélectionnez Draw s’affiche : Sélectionne la main levée ou le rectangle afin de saisir des écrans Permet d’utiliser le Si vous sélectionnez ci-dessous. 2. Sélectionnez l’icône d’appareil photo TeamBoard Draw : 3. Sélectionnez l’icône ouvrir le mode de dessin sur « tableau blanc » sur plein écran : Utilisation des crayons interactifs TeamboardAnnotate clavier virtuel...
Pour obtenir plus d’information concernant l’utilisation des outils de TeamBoard Draw et la sauvegarde de vos dessins et annotations, sélectionnez le menu Aide. Utilisation des fonctions de Tablet PC et d’entrée manuscrite Lorsque vous installez le pilote Easy Interactive Driver, la fonction Tablet PC est ®...
Résolution des problèmes Si vous avez un problème avec votre projecteur, vous pouvez appuyer sur le bouton de la télécommande pour vous aider à résoudre le problème. ? Help Vous pouvez aussi consulter la section suivante pour obtenir des suggestions de dépannage de base ou consulter le Guide de l’utilisateur à...
Page 55
Si vous ne voyez pas l’icône de crayon (Windows) ou sur le Dock (Mac OS), procédez comme suit : Windows : Sélectionnez > Programmes EPSON Projector Macintosh : Ouvrez le dossier Interactive Driver ■ Si un rouge apparaît sur l’icône du crayon, l’ordinateur et le projecteur ne sont pas connectés correctement.
Page 56
■ Assurez-vous que les piles du crayon sont suffisamment chargées. Si le témoin du crayon ne passe pas au vert lorsque vous appuyez sur le bouton, vous avez besoin de remplacer les piles. ■ Veillez à ne pas faire une ombre sur la surface de projection et assurez-vous que rien bloque le signal entre le crayon et le récepteur interactif sur le projecteur.
Support. Il s’agit du moyen le plus rapide de parler directement à un représentant Epson et c’est gratuit. Ce service est offert de 6 h à 18 h, heure du Pacifique, du lundi au vendredi, pendant toute la durée de votre garantie.
Page 58
Achat de fournitures et d’accessoires Vous pouvez vous procurer des lampes ou d’autres accessoires auprès d’un revendeur agréé Epson. Composez le 1 800 463-7766 pour les coordonnées du revendeur le plus proche. Vous pouvez aussi acheter en ligne à www.epson.ca.
47CFR, alinéa 2.909. Le fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer de brouillage préjudiciable et, (2) cet appareil doit accepter tout brouillage reçu, y compris le brouillage pouvant provoquer un fonctionnement indésirable. Nom commercial : Epson Type de produit : Projecteur ACL Modèle :...
Garantie limitée de deux ans sur le projecteur et garantie limitée de 90 jours sur la lampe Ce que couvre la garantie : Epson America, Inc. (« Epson ») garantit au premier acheteur au détail que le projecteur Epson couvert par la présente garantie limitée, s’il est acheté neuf et utilisé...
Page 61
Pour obtenir les coordonnées d’un revendeur autorisé Epson le plus près de vous, veuillez visiter le site Web à l’adresse : www.epson.ca. Pour obtenir les coordonnées du centre de service agréé Epson le plus près de vous, veuillez visiter le site Web : www.epson.ca/support.
Epson d’origine ou comme produits approuvés pour Epson par Seiko Epson Corporation. Marques de commerce Epson est une marque déposée et Epson Exceed Your Vision est un logo déposé de Seiko Epson Corporation. BrightLink est une marque de commerce et PrivateLine et Extra Care sont des marques de service d’Epson America, Inc.
Page 64
CPD-28211 Printed in: XXXXXX Pays d’impression : XXXXXX...